STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one 15-pin SATA power connector into five to run 2.5" SSDs, 3.5" HDDs and optical drives from a single PSU lead
This 15-pin SATA power cable turns one male connector into five female connectors, letting you run up to five drives from a single power-supply lead. The 24-inch assembly uses 18AWG tin-coated copper wire rated for 3.3V, 5V and 12V. It suits builders adding multiple 2.5-inch SSDs, 3.5-inch HDDs or optical drives without free PSU cables.
Use it when your power supply lacks enough native SATA plugs or the existing cables cannot reach every drive bay. The staggered 8-inch, 4-inch, 4-inch, 4-inch, 4-inch spacing fits typical mid-tower layouts. The jump is worth it if you are installing several drives at once and want a single tidy run instead of multiple extensions.
Verify every target device uses a standard 15-pin SATA power port; the supplier warns that forcing this cable into an incompatible port will burn components. Ensure your power supply can deliver the combined current draw of all attached drives. The included self-adhesive tape helps secure the cable run inside the case.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The cable measures 60 cm overall: a 20 cm lead to the first female connector, then four 10 cm segments between the five SATA power plugs.
Push the keyed 15-pin male into the PSU SATA power port until it clicks; press each 15-pin female onto the drive until seated, then use the included self-adhesive tape to anchor the cable run.
Replace the splitter if the tin-coated copper conductors show cracking, the 15-pin housings become loose, or voltage drop appears on the 3.3 V, 5 V or 12 V rails under load.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?