We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 18 AWG PCIe cables with 6-pin to dual 8-pin connectors and nylon ties

Vszerda

Vszerda 2 Pack 6 Pin Male to Dual 8 (6+2) Pin Male PCI Express Power Adapter Extension Cable 18AWG 27.5 inch

SKU CH-9B08-FD92D

Two 18 AWG cables convert a single 6-pin PSU connector into dual 8-pin (6+2) GPU plugs at 27.5 inch length and include six nylon cable ties

  • 18 AWG wire handles high current for stable GPU power
  • 5 inch length gives flexible routing inside any case
  • 6-pin to dual 8-pin (6+2) splits one connector into two
  • Keyed rails and latch on each end prevent accidental disconnection
  • Pack includes two adapter cables plus six nylon cable ties

Two-adapter pack for dual GPU power

This pack contains two 18 AWG cables that convert a single 6-pin PCIe connector into two 8-pin (6+2) connectors. Each cable measures 27.5 inch and includes keyed rails plus a latch to prevent accidental disconnection. Six nylon cable ties are supplied for tidy routing. The adapters suit standard graphics cards that require supplemental 6-pin power.

Replaces missing native 8-pin leads

When a power supply lacks enough native 8-pin PCIe outputs, these splitters let one 6-pin port feed two 8-pin inputs. The jump is worth it for builders adding a second card or upgrading to a model that needs dual 8-pin power while the PSU still has spare 6-pin capacity. They are not for systems where the PSU already provides sufficient native 8-pin connectors.

Limited by 6-pin source rating

Each splitter draws total load through the single 6-pin source connector, so combined card draw must stay within that connector's specification. The 18 AWG wire handles higher current than thinner gauges, yet the upstream PSU rail and 6-pin terminal remain the practical ceiling. Exceeding the source rating risks instability or connector damage.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $41.99
Pricier than about 80% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance do I need for the 27.5 inch cable and its dual 8 (6+2) pin connectors?

Each cable measures 27.5 inches from the 6 pin male end to the split dual 8 (6+2) pin male ends, so allow that length plus room for the connector housings.

Which way round do the keyed rails on the 8 pin male PSU PCIe connectors go when plugging into the graphics card?

Align the keyed rails on each 8 pin male connector with the card's socket notch, then press until the latch on the 6 pin female end clicks onto the PSU cable.

When should I replace the 18 AWG wires or the included nylon cable ties?

Inspect the 18 AWG conductors for discolouration or melted insulation and swap the cable if found; replace any nylon ties that become brittle or lose grip.

More in Internal PSU & Riser Cables

Similar items