STARTECH HDMI-SPLITTER-4K60UP 2-Port 4K 60Hz Video Splitter
- HDMI Splitters
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two HDMI sources connect to two displays at 4K 60 Hz with optical and 3.5 mm audio extraction
The Vszerda 2x2 HDMI switch splitter routes video and audio from two HDMI sources to two displays at the same time. It supports 4K at 60 Hz, HDR10 and 3D formats with HDMI 2.0b and HDCP 2.2 compliance. An IR remote and a front button let you switch sources without cable swaps. Optical SPDIF and 3.5 mm AUX outputs extract audio for external sound systems.
A simple 1x2 splitter cannot select between two sources or send different resolutions to each display. This matrix adds source switching, 4K-to-1080p downscaling on one output while the other keeps 4K, and audio breakout for receivers that lack HDMI inputs. The upgrade is worth it when you need to share a console and a media player across two screens with independent audio routing.
The 18 Gbps link caps 4K 60 Hz signals at 4:4:4 colour sampling and 8-bit depth; 10-bit or 12-bit HDR at 4K 60 Hz 4:4:4 exceeds the pipe. Cable runs over 10 metres at 4K 60 Hz or 20 metres at 1080p may lose stability. DTS 7.1 and multichannel PCM beyond the listed formats are not supported, and the matrix only mirrors content — it cannot extend a desktop across both outputs.
Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The unit is a compact box that sits on a shelf or desk; allow a few centimetres around the HDMI ports and the 3.5 mm jack for cable bend radius.
Remove the plastic tab from the remote battery, aim at the front IR window, then press the input-select button until the LED shows the desired source for each output.
Keep the optical port dust caps on when not in use and wipe the 3.5 mm jack with a dry brush; no internal parts require service.
More in HDMI & Video Splitters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?