Vszerda 3x2 HDMI Matrix 4K@60Hz IR Remote Black
Routes three 4K HDR sources to two displays with IR remote control, optical and 3.5 mm audio extraction, and HDMI 2.0b HDCP 2.2 support
- Connect three 4K HDR sources to two displays
- Extract audio via optical or 3.5mm jack
- Switch inputs with IR remote or front button
- Supports 18.5Gbps bandwidth and 4K@60Hz
- Compact 170×56×24mm design with DC 5V power
3x2 HDMI Matrix for multi-source setups
This Vszerda HDMI matrix connects three 4K HDR sources to two displays and lets you route each input independently. It supports 4K at 60 Hz with HDR10 and 3D, plus HDMI 2.0b and HDCP 2.2 compliance. The unit is aimed at installers or enthusiasts who need simultaneous switching and splitting across two screens.
Audio extraction and EDID control included
The box adds Toslink optical and 3.5 mm stereo outputs so you can pull multichannel LPCM 2.1 or Dolby and DTS 5.1 audio from any input separately or together. A built-in EDID manager lets you set preferred timings per source, and the IR remote plus front-panel button give two ways to change routing without extra software.
Desktop install with IR line of sight
The compact 170 by 56 by 24 mm enclosure runs on a 5 V DC supply drawing up to 600 mA and operates from -15 °C to 45 °C. Installation is straightforward: connect sources, displays, power and audio cables, then use the remote or button. The IR sensor needs direct visibility, so hidden rack mounts may require an extender. Buyers who need more than three inputs or more than two outputs should look elsewhere.
How it compares
Measured against everything we stock in HDMI & AV Selector Switches, at today’s prices. Recalculated every night.
- Price $40.99
- Pricier than about 77% of the 1,998 comparable items (median $27.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the DC 5V power adapter need replacing if it fails after extended use?
The unit ships with a DC 5V supply rated at 600mA; any equivalent 5V adapter meeting that current can replace it without opening the matrix.
At sustained 4K@60Hz operation, does the 18.5Gbps bandwidth or the 600MHz TMDS clock become the limiting factor first?
Both specifications describe the same 18.5Gbps / 600MHz ceiling, so the link budget hits that single limit before any other parameter.
How warm does the 170×56×24mm enclosure get when switching three 4K HDR sources continuously?
Rated for -15°C to +45°C ambient, the fanless metal chassis stays within that range during all-day operation with no audible noise.
More in HDMI & AV Selector Switches
Similar items
ESTONE OZJ2 4K@60Hz HDMI Matrix 4x2 Switch Splitter
- HDMI Switch/Extender
- HDMI Switchers
Tripp Lite B119-004-UHD 4-Port HDMI Switch 4K 60 Hz Remote
- 4-Port UHD
- HDMI Switchers
LUOM OZJ2 4x2 HDMI Matrix Switch 4K@60Hz 18.5Gbps Audio
- HDMI Switch/Extender
- HDMI Switchers
LUOM OZJ2 4×2 HDMI Matrix Switch 4K@60Hz 18.5 Gbps Audio
- HDMI Switch/Extender
- HDMI Switchers





