We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter board with 44-pin connector and SATA ports, black finish

Vszerda

Vszerda 44Pin 2.5" IDE/SATA Adapter 90/180° JM20330 1.5G ATA 100/133

SKU CH-K2E2-AH076

Bidirectional 44-pin 2.5" IDE/SATA adapter with 90/180° orientation, JM20330 chip and 1.5G SATA supporting ATA 100/133

  • Connect 2.5" IDE drives to SATA ports using the JM20330 chip
  • Swap between 90° and 180° orientations for tight spaces
  • Transfer data at up to 1.5 Gbps with ATA 100/133 support
  • Use with 44-pin HDD, CD or DVD devices on either interface

Bidirectional 44-pin 2.5-inch IDE/SATA adapter

This adapter connects a 44-pin 2.5-inch IDE drive to a SATA port or a 2.5-inch SATA drive to a 44-pin IDE port. It uses a JM20330 bridge chip and supports ATA 100 and ATA 133 modes. The flexible 90 or 180-degree orientation helps fit tight drive bays or laptop caddies.

Limited to 1.5 Gbit/s SATA throughput

The bridge operates at SATA 1.5 Gbit/s, so maximum sustained transfer rates are capped well below modern SATA 3 Gbit/s or 6 Gbit/s speeds. Drives capable of higher throughput will be bottlenecked by the adapter. It is unsuitable for applications needing the full bandwidth of newer SATA revisions.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 83% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 90-degree or 180-degree connector angle?

Choose the 90-degree angle when space beside the drive is tight, or the 180-degree angle for a straight run; both are included with the adapter.

What does the 1.5G SATA link mean for an ATA 100/133 drive?

The JM20330 chip bridges the 44-pin IDE drive to a 1.5 Gbps SATA port, so the drive runs at its native ATA 100 or ATA 133 speed without exceeding the SATA link.

More in SATA, IDE & M.2 Drive Adapters

Similar items