STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a Mini SAS SFF-8643 host port to four SATA drives at 12 Gbps over one metre
This Vszerda CS0035 cable connects a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. The one metre length suits internal chassis routing in servers or workstations. It is built for new installations that need to split a single high-density connector into four standard drive links.
The cable only works when the host side presents an SFF-8643 interface; an SFF-8646 backplane port will not mate with this connector. Verify the controller or motherboard port type before purchase to avoid a physical mismatch. The four SATA targets are standard 10-pin connectors for ordinary hard drives.
Rated at 12 gigabits per second, the copper conductors maintain full SAS speed across all four lanes during continuous transfers. The hybrid SFF-8643 design supports the transition toward 15 Gbps without requiring a cable change. Serial Attached SCSI signalling ensures reliable high-throughput access under sustained load.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | CS0035 |
| Product type | Mini sas |
| Product color | Black |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector details | Mini Sas (Sff-8643), Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Each SATA drive runs at up to 6 Gb/s, so the 12 Gb/s SFF-8643 link provides enough bandwidth for two drives at full speed simultaneously.
The host end uses SFF-8643, which supports 12 Gb/s SAS signalling and is not compatible with SFF-8646 backplane ports.
The male SFF-8643 plug needs a standard internal mini SAS port on the controller; the cable is 1 m long and uses a straight connector.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?