Vszerda DisplayPort 1.4 cable 10 ft 32.4Gbps 8K@60Hz 4K@144Hz 2K@240Hz
A 10 ft DisplayPort 1.4 cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR10 and DSC 1.2 compression
Cable Length 10 Feet
- 3.3 Feet$7.99
- 6.6 Feet$8.99
- 10 Feet$18.99
- 8K resolution at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz refresh rate for smooth gaming
- 2K at 240 Hz refresh rate for competitive play
- 4 Gbps bandwidth with DSC 1.2 compression
- Triple-layer shielded 28AWG tinned copper with 30000+ bend lifespan
8K DisplayPort 1.4 cable, 10 ft
This Vszerda cable carries DisplayPort 1.4 signals at 32.4 Gbps over a 10 ft run. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR10 and DSC 1.2. The 28 AWG tinned copper conductors and triple shielding keep the signal clean.
Gamers and creators driving high-refresh monitors
The bandwidth handles 4K 144 Hz and 2K 240 Hz gaming without compression artefacts. Buyers needing longer runs or in-wall ratings should look at active optical cables instead. It is not suited for permanent installations that require CL2 or CL3 fire ratings.
Fits between GPU and monitor with standard DP ports
Gold-plated connectors mate with any DisplayPort 1.4, 1.3 or 1.2 source and sink. The nylon braid survives 30 000 bend cycles, so cable routing stays tidy. No external power or driver is required, freeing a USB port on the host.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 60% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda DisplayPort 1.4 cable 10 ft 32.4 Gbps 8K 60Hz 4K 144Hz 2K 240Hz
Vszerda DisplayPort 2.0 cable 10 ft 16K 60 Hz 8K 60 Hz 4K 165 Hz 80 Gbps
Questions about this item
Does my graphics card need a DisplayPort 1.4 output to get 8K at 60 Hz from this cable?
Yes — the cable is built to the DisplayPort 1.4 specification with HBR3 and 32.4 Gbps bandwidth, so the source must provide a DP 1.4 port to reach 7680 × 4320 at 60 Hz.
Will this cable still work if I keep my older monitor that only supports DisplayPort 1.2?
The cable is backward compatible with DisplayPort 1.3 and 1.2, so it will carry video to a DP 1.2 monitor at that standard’s maximum resolution and refresh rate.
How can I confirm the cable is delivering 4K at 144 Hz after I plug it in?
Open your GPU control panel or the monitor’s on-screen menu and verify the active signal shows 3840 × 2160 at 144 Hz with HDR enabled if your display supports it.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
ESTONE TJ-A033 DisplayPort 1.4 cable 16.4 ft 8K 60Hz 4K 144Hz 32.4 Gbps black
- 16.4 ft (5 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
LUOM BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz
- 10 ft (3.05 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
Jansicotek BK-CD2 USB-C to DisplayPort 1.4 cable 10 ft 8K@60Hz 4K@144Hz
- 10 ft (3.05 m)
- DisplayPort Cable










