We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black adapter cable with dual SATA 15-pin plugs and PCIe 6-pin connector

Vszerda

Vszerda HX-SA-117 Dual SATA 15Pin to PCIe 6Pin Power Adapter Cable

SKU CH-8B3K-96FZN

Converts two SATA 15-pin power connectors into a single PCIe 6-pin plug for Vszerda graphics card power supply compatibility

  • Connector detailsDual Sata 15pin Power to Pcie 6pin Power
  • Connector genderMale-to-Female
  • Conductor typeCopper
  • Product typeInternal Power Cable
  • Product colorPCIE-6P to Dual SATA-15P
  • Key featuresDual SATA 15Pin Power to PCIE 6Pin Power
  • Dual SATA 15-pin connectors power a PCIe 6-pin graphics card
  • Adapts an older PSU without native PCIe power for newer GPUs
  • Two separate SATA lines spread load across the power supply
  • Copper conductors deliver 5 V and 12 V DC to the card
  • Male-to-female terminals ensure a secure internal connection

Vszerda HX-SA-117 Power Adapter

The Vszerda HX-SA-117 adapter converts two SATA 15-pin power connectors into a single PCIe 6-pin plug for graphics cards. It enables older or non-PCIe power supplies to deliver DC 5V and 12V power to modern video cards. Copper conductors carry current between the male SATA ends and the female PCIe connector. The cable suits builders upgrading a GPU without replacing the power supply.

Ideal for legacy PSU upgrades

This adapter suits owners of power supplies lacking native PCIe 6-pin outputs who need to power a compatible graphics card. It is not for systems that already provide sufficient native PCIe connectors or for cards requiring an 8-pin or 12VHPWR connection. Builders needing multiple PCIe power plugs should look at a dedicated modular cable set or a new power supply. Units without two separate SATA power lines cannot use this adapter as intended.

Simple plug-in installation

Installation requires connecting each SATA 15-pin male end to separate power supply cables, then plugging the PCIe 6-pin female end into the graphics card. No tools or software configuration are needed. The most common issue arises when both SATA connectors draw from the same rail, risking overload under heavy GPU load. Loose SATA connections can also cause intermittent power delivery. Ensure firm seating on all three plugs before powering on.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 75% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameVszerda
Model nameHX-SA-117
Product typeInternal Power Cable
Product colorPCIE-6P to Dual SATA-15P
Ports & slots
Connector detailsDual Sata 15pin Power to Pcie 6pin Power
Connector genderMale-to-Female
Size & build
Conductor typeCopper

Questions about this item

What power supply connectors must I already have free to plug in the dual SATA 15-pin ends?

Two separate SATA 15-pin power lines from the PSU are required, preferably on different rails.

Will the PCIe 6-pin plug on this cable work with an older graphics card that only needs a 6-pin connection?

Yes, the PCIe 6-pin male connector fits any GPU or device that uses a standard 6-pin PCIe power socket.

How can I verify the adapter is delivering both 5 V and 12 V to the graphics card after installation?

Measure the PCIe 6-pin pins with a multimeter; you should read 12 V on the yellow wires and 5 V on the red wires under load.

More in SATA & eSATA Drive Cables

Similar items