We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board adapter with M.2 slot and E1.S edge connector

Vszerda

Vszerda M.2 NVMe M Key to EDSFF E1.S Adapter PCIe 4.0/3.0 x4 2230-2280

SKU CH-TDGG-F23F5

Converts M.2 NVMe SSDs to EDSFF E1.S format with PCIe 4.0/3.0 x4 support for 2230-2280 drives in 1U server chassis

  • Converts M.2 NVMe drives to EDSFF E1.S form factor for 1U server chassis
  • Supports PCIe 4.0 and 3.0 x4 bandwidth for full NVMe performance
  • Accepts 2230, 2242, 2260 and 2280 length M-key SSDs
  • Enables high-density storage upgrades in enterprise server environments

M.2 NVMe to EDSFF E1.S Adapter

The Vszerda adapter converts an M-key NVMe SSD into the EDSFF E1.S form factor for 1U server chassis. It operates over PCIe 4.0 and 3.0 x4 lanes and accepts module lengths of 2230, 2242, 2260 and 2280.

Suits administrators adding high-density NVMe

The card does not support modules longer than 2280, so deployments requiring larger form factors will need a different solution. It also provides no protocol conversion, so drives using other interfaces cannot be used.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 77% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will this adapter run at PCIe 3.0 speeds if my server chassis only supports PCIe 3.0?

Yes, the adapter is compatible with PCIe 3.0 x4 and will operate at that speed when installed in a PCIe 3.0 slot.

How can I confirm the adapter is correctly detecting my M.2 NVMe SSD after installation?

The SSD should appear in the system BIOS or UEFI firmware and be visible to the operating system once the M.2 NVMe drive is seated and the adapter is installed in the E1.S bay.

More in SATA, IDE & M.2 Drive Adapters

Similar items