We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Mini SAS SFF-8643 to four SFF-8482 breakout cable with SATA power adapters

Vszerda

Vszerda Mini SAS-012 SFF-8643 to 4× SFF-8482 breakout cable 3.3 ft with SATA power

SKU CH-E7W1-Q6RFY

Connects a Mini SAS HD SFF-8643 host to four SFF-8482 drives with integrated SATA power at 6 Gb/s per drive

  • Rated speed6 GB/s
  • Conductor typeCopper
  • Product typeMini-SAS Cables
  • Product colorBlack/Blue
  • Overall length3.3
  • Key featuresSff-8643 to sff-8482 sas breakout cable with sata power
  • Connects one SFF-8643 host to four SFF-8482 drives with integrated SATA power adapters
  • 6 Gb/s per drive data rate supports high-throughput storage arrays
  • 30 AWG thin braided cable simplifies routing in tight chassis
  • 3 ft length fits standard server and workstation layouts
  • Labeled connectors speed up installation and cable management

Vszerda Mini SAS-012 breakout cable

This Vszerda Mini SAS-012 cable connects an SFF-8643 host port on a controller or motherboard to four SFF-8482 target drives with integrated SATA power adapters. It serves builders expanding internal storage using SAS or SATA hard drives and SSDs. The 3.3 ft length suits typical chassis routing.

Sustained 6 Gbps per drive over copper

Each of the four lanes delivers up to 6 gigabytes_per_second data transfer using 30 AWG copper conductors. The thin, braided cable construction maintains signal integrity during continuous read or write workloads across all connected drives. SATA power must be attached to every SFF-8482 adapter for operation.

SFF-8643 male host to four SFF-8482 targets

The cable functions only in a forward breakout direction: the SFF-8643 male connector attaches to the controller side, while the four labelled SFF-8482 connectors attach to drives or a backplane. It does not work when the SFF-8643 end is connected to a backplane or target device.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $20.99
Pricier than about 75% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameADCAUDX
Model nameMini SAS-012
Product typeMini-SAS Cables
Product colorBlack/Blue
Performance
Rated speed6 GB/s
Size & build
Conductor typeCopper

Questions about this item

Does the 3.3 ft cable run hot or draw extra power during continuous operation?

The copper conductors carry data only; all drive power comes from the separate SATA 15-pin adapters, so the cable itself adds no measurable heat or power draw.

What must already be in the system for the SFF-8643 end to connect and the four SFF-8482 ends to power drives?

You need a controller or motherboard with an internal Mini SAS HD SFF-8643 port, plus a SATA power cable from the PSU for each of the four drive adapters.

Will this breakout work with an older SFF-8087 HBA and 6 Gbps SAS or SATA drives?

The host connector is SFF-8643 male, not SFF-8087, so it plugs directly into a 12 Gbps controller; each target runs at 6 Gbps and accepts both SAS and SATA drives.

More in SATA & eSATA Drive Cables

Similar items