We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue Mini SAS 36-pin to four 29-pin cables with SATA power connectors, 3.3 ft each

Vszerda

Vszerda Mini SAS 36 Pin SFF-8087 to 4×29 Pin SFF-8482 with SATA Power 3.3 ft 2-pack

SKU CH-0JD2-F77TR

Connects a SAS controller to four SATA drives via 36-pin to 29-pin fan-out cables with integrated SATA power, 3.3 ft each, two-pack

  • Product colorBlack&Blue
  • Connects a SAS controller to four SATA drives via SFF-8087 to SFF-8482 fan-out
  • Includes SATA power connectors for direct drive power without extra cables
  • 3 ft length suits typical chassis routing between controller and drive bays
  • Two cables per pack provide spare or dual-controller configurations
  • 36-pin host to 4×29-pin target layout matches standard internal SAS cabling

Internal SAS breakout cable for controller-to-disk

This two-pack provides Mini SAS 36-pin SFF-8087 to four 29-pin SFF-8482 fan-out cables, each 3.3 ft long with integrated SATA power connectors. They link a SAS controller directly to four SATA or SAS hard drives inside a chassis. The black-and-blue colour coding aids cable management in dense enclosures.

Check controller port type

Verify that your host controller exposes an SFF-8087 36-pin port and that each target drive uses a 29-pin SFF-8482 interface. The cable is designed for controller-based fan-out and will not function when plugged into a SAS driver or expander port. Confirm that 3.3 ft reaches from the controller to the furthest drive bay without strain.

Replaces loose single-cable assemblies

Upgrading from individual SATA or SAS leads reduces clutter and improves airflow when populating four drives from one controller port. The jump is worthwhile when you need a tidy, repeatable harness for hot-swap bays or backplanes and the 3.3 ft length suits your chassis depth. Builders needing longer runs or a different pin count should look elsewhere.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $30.99
Pricier than about 72% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameVszerda
Product colorBlack&Blue

Questions about this item

What connectors and cables are included in the 2-pack and do I need to buy a separate power supply?

The pack contains two 3.3 ft cables, each with a 36 pin SFF-8087 host end and four 29 pin SFF-8482 target ends plus a SATA power connector; no extra power supply is required beyond your system's SATA power lead.

Which version should I choose if my controller has a SFF-8087 port and I want to attach four SATA drives?

This single version is built for that exact layout: a Mini SAS 36 pin SFF-8087 host connector fans out to four 29 pin SFF-8482 connectors with SATA power for four SATA disks.

Will the 36 pin to 4×29 pin cable deliver full SAS speeds to my SATA drives once installed?

The cable passes the SAS controller signal to each SATA drive through the 29 pin SFF-8482 connectors; actual transfer rates are limited by the SATA drives and controller, not by the cable itself.

More in Internal PSU & Riser Cables

Similar items