Vszerda Mini SAS to SATA Cable 1M SFF-8087 to 4x SATA 6Gbps
Connects a Mini SAS SFF-8087 controller to four SATA drives at 6 Gbps per drive
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack+Blue
- Overall length3.3
- Key featuresSff-8087 to sata forward breakout mini sas to sata cable
- Connect up to four drives with one cable
- 6 Gbps per drive for fast data transfer
- 1 m length suits most chassis layouts
- Locking latches on both ends secure the connection
- 30 AWG braided wires simplify cable routing
Mini-SAS SFF-8087 breakout cable
This one-metre cable connects a Mini-SAS SFF-8087 host port on a RAID controller or motherboard to four SATA drives. It is built for installers who need to expand internal storage using existing SAS infrastructure. The forward breakout wiring makes the SAS connector the host side and the four SATA connectors the target side.
Locking latches and labelled leads
Both the 36-pin Mini-SAS plug and each SATA 7-pin receptacle feature locking latches that resist accidental disconnection. The four breakout leads are individually labelled, and the 30 AWG conductors are wrapped in a braided sleeve that keeps routing tidy inside a chassis.
Suits SAS-to-SATA storage builds
This cable fits builders attaching up to four SATA hard drives or SSDs to a Mini-SAS 3Gbps or 6Gbps controller. It will not work if the SFF-8087 port is on a backplane instead of a host controller, and it cannot be used for SATA-to-SAS reverse connections or for any interface other than SAS and SATA.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $19.99
- Pricier than about 73% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | MINISAS-001 |
| Product type | Mini-SAS Cables |
| Product color | Black+Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the SFF-8087 locking latch or the four SATA 7-pin connectors wear out and need replacement?
Both ends use locking latches rated for repeated mating cycles; under normal internal use they do not require scheduled replacement.
What throughput limit appears first when all four drives run sustained transfers?
Each SATA 7-pin lane is capped at 6 Gbps, so the per-drive 6 Gbps ceiling is the first bottleneck.
How much heat or extra power does the 1-metre copper cable add during all-day operation?
The passive 30 AWG copper assembly draws no auxiliary power and adds negligible heat inside the chassis.
More in SATA & eSATA Drive Cables
Similar items
Electop Black-02 SATA III 90° braided cable 20 in black 5-pack
- Sata 3
- Composite
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III





