STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds two vertical SATA 6.0 Gbps ports to an NGFF Key B+M slot for 2230 to 2280 drives with JMB582 controller
This Vszerda NF-SA-043 adapter converts an NGFF Key B+M PCI Express slot into two vertical SATA 3.0 ports. It uses the JMB582 controller to provide 6.0 Gbps, 3.0 Gbps and 1.5 Gbps transfer rates. The card accepts 2230, 2242, 2260 and 2280 form-factor modules. Copper conductors ensure reliable signal integrity.
Ideal for systems with a free Key B+M M.2 socket that need extra SATA storage. Native command queuing and error correction keep drives stable under load. Hot-swap and power-management features simplify drive changes. Not for users whose motherboard lacks a Key B+M M.2 connector or who require more than two SATA ports.
The JMB582 chip is the single specification that determines compatibility and throughput. It delivers two independent SATA 3.0 channels at up to 6.0 Gbps each. Support for Gen1 through Gen3 signalling ensures backward compatibility with older drives. Verify your slot is Key B+M PCI Express before purchase.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | NF-SA-043 |
| Size & build | |
| Conductor type | Copper |
The card uses a vertical SATA interface that extends upward from the NGFF Key B+M slot; measure the clearance above your motherboard to confirm the 2280 form factor fits.
Insert the adapter into a Key B+M PCI Express slot, connect the SSDs to the two vertical SATA3.0 ports, then ensure the motherboard BIOS is set to AHCI mode for the controller.
Inspect the copper SATA cable and port for bent pins or dust; the JMB582 supports Gen1i through Gen3i speeds, so a drop to 1.5Gbps usually indicates a physical connection issue.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?