STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Splits one 15-pin SATA power plug into four sockets for drives and PCIe cards, 50 cm each, two cables included
This two-pack of 15-pin to four SATA power splitters adds extra device connections to a power supply with limited SATA ports. Each cable feeds up to four hard drives, solid-state drives, optical drives or PCIe cards from a single 15-pin source. Builders upgrading or repairing systems can expand capacity without replacing the power supply. The 50 cm harness spaces each connector 4.5 inches apart for tidy routing.
The 18 AWG copper conductors and bare copper shielding maintain stable current across all four branches under normal loads. Flexible PVC insulation resists heat buildup inside the chassis and keeps the cable pliable during installation. No active cooling or fan noise is introduced because the assembly is entirely passive. Power draw follows the limits of the host supply and attached devices.
Tangle-free PVC jacketing protects the 12 individual wires from abrasion during repeated routing and component swaps. Male-to-female gender on each branch ensures a secure, keyed fit with standard SATA power sockets. The 20-inch overall length reaches across full-tower interiors while the 4.5-inch spacing prevents connector crowding around drive cages. Two identical cables are included for multi-bay deployments.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | YSIUENG |
| Model name | P4SATA-US |
| Product type | AUX |
| Ports & slots | |
| Connector details | Auxiliary |
| Connector gender | Male-to-Female |
Align the 15-pin male plug with the PSU's keyed SATA power port; it inserts one way only. Do not force it — check orientation if resistance is felt. Route the 50 cm harness so each of the four 15-pin female sockets reaches its drive without tension.
Inspect the PVC jacket and 18 AWG conductors periodically for cracking or heat discoloration near the 15-pin connectors. Replace the cable if insulation becomes brittle or if any socket shows melted plastic or loose pins.
The single 15-pin plug draws all current from one PSU rail. Sustained loads from four 3.5-inch HDDs or mixed 2.5 SSDs and optical drives can exceed that rail's rating, causing voltage droop or connector heating first.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?