We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 18AWG ribbon cable 20 cm long with one 6-pin male and two 8-pin female connectors

Vszerda

Vszerda PCIe 6-pin to 2×8-pin (6+2) power splitter cable 20 cm 18AWG

SKU CH-DFMP-5NEZ6

Splits one PCIe 6-pin PSU connector into two 8-pin (6+2) GPU plugs using 18AWG copper over 20 cm

  • Powers two graphics cards from one PSU connector
  • 18AWG copper conductors deliver stable current
  • 20 cm length fits compact mining rigs
  • Each output supports 6-pin or 8-pin GPUs
  • PCI Express 2.0 compatible connectors

20 cm PCIe 6-pin to dual 8-pin splitter

This Vszerda cable splits a single PSU 6-pin PCIe connector into two 8-pin (6+2) female plugs. It is built for miners or builders who need to power two graphics cards from one 6-pin rail. The 18AWG copper conductors handle the current required by typical mid-range GPUs.

18AWG copper conductor rating

The 18AWG wire gauge is the critical spec that determines safe current delivery. Thinner wire would overheat under dual-GPU load, while thicker wire is unnecessary bulk. This gauge matches the 6-pin source rating so the splitter does not become the bottleneck.

Simple plug-in, watch total draw

Installation is a direct male-to-female connection with no tools required. The 20 cm length keeps routing tidy inside mining frames or compact cases. The common mistake is exceeding the 6-pin source limit; the splitter only divides power, it does not create extra wattage.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 80% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How does the 2.0 designation affect what this splitter can deliver to a graphics card?

The 2.0 label refers to the PCI Express connector generation; the splitter simply routes the existing 6-pin supply through to two 6+2 outputs without changing voltage or signalling.

Will a single PSU 6-pin connector safely feed two 8-pin (6+2) GPU inputs through this adapter?

The cable uses 18 AWG copper conductors to carry the supply from one 6-pin to two 6+2 connectors; total draw must stay within what the PSU 6-pin rail is rated for.

What clearance is needed to route the 20 cm ribbon between the PSU and a dual-8-pin graphics card?

The flat ribbon measures 20 cm end-to-end with a 6-pin male at one end and two 6+2 females at the other, so allow that length plus connector depth inside the case.

More in Internal PSU & Riser Cables

Similar items