Vszerda R27SF U.2 NVMe to PCI-E 3.0 x4 SFF-8639 Cable 30cm
Connects a U.2 NVMe drive to a PCIe 3.0 x4 slot using an SFF-8639 male-to-male cable at 8 Gbps over 30 cm
- Connector detailsSff-8639
- Connector genderMale-to-Male
- Product typePCI-E
- Key featuresHigh Speed
- Connects U.2 NVMe SSDs to PCI-E 3.0 x4 slots
- SFF-8639 male-to-male connector ensures secure data link
- 30 cm length fits compact chassis builds
- High-rate transmission rated at 8G/BPS
- New condition guarantees reliable out-of-box performance
U.2 NVMe Extension Cable
This Vszerda R27SF cable connects a U.2 NVMe solid-state drive to a PCI-E 3.0 x4 slot using an SFF-8639 interface. The 30cm length suits internal routing inside a chassis or test bench. It is built for high-rate data transmission at 8Gbps. The male-to-male terminals plug directly into the drive and the host adapter.
Build Quality and Daily Use
The SFF-8639 connector locks securely to prevent accidental disconnection during vibration or drive swaps. Shielded construction helps maintain signal integrity across the PCI-E 3.0 x4 link. The short 30cm run reduces latency and cable clutter in tight enclosures. Male-to-male gender means no extra gender changers are required.
Compatibility Check
Verify that your host controller or riser card presents a true PCI-E 3.0 x4 electrical link with an SFF-8639 port. Confirm the U.2 drive uses the standard SFF-8639 pin-out and does not require a separate power cable. Ensure the 30cm reach fits the physical path between your drive bay and the slot. Buyers needing longer runs or right-angle connectors should look elsewhere.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 90% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | R27SF |
| Product type | PCI-E |
| Ports & slots | |
| Connector details | Sff-8639 |
| Connector gender | Male-to-Male |
Questions about this item
What PCIe generation and lane width does the Vszerda R27SF cable support, and what throughput does that cap at?
The cable carries a PCI-E 3.0 x4 link, which tops out at 8 Gbps per lane.
What physical connectors and cable length do I need to fit this between my U.2 drive and motherboard?
It has male-to-male SFF-8639 connectors and measures 30 cm end-to-end.
How do I install the Vszerda R27SF cable, and which step do builders most often get wrong?
Plug one end into the U.2 NVMe SSD and the other into the PCI-E 3.0 x4 slot, making sure both SFF-8639 connectors seat fully before powering on.
More in SATA & eSATA Drive Cables
Similar items
Lemonra 5 Port Non-RAID SATA III 6GB/s JMB585 adapter card
- System Requirements…
- Black
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Fervit Mini SAS HD SFF-8644 to SFF-8644 Cable with IC 12Gbps 28AWG 3m
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Graviton SATA/SAS Controller Card LSI 9261-8i 512MB Cache SFF-8087 PCI-E 2.0 X8
- Controller Card
- Green





