We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SAS cable with 29-pin connector, 22-pin SATA plug and 4-pin IDE power

Vszerda

Vszerda SAS SFF-8482 29-pin to SATA 22-pin cable with IDE 4-pin power

SKU CH-N59C-R8Q8R

Connects 29-pin SAS drives to 22-pin SATA ports with IDE 4-pin power at 6 gigabytes per second

  • Rated speed6 GB/s
  • Connector detailsSas Sata
  • Connector genderMale-to-Female
  • Conductor typeCopper
  • Product typeCY SAS Cable SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Dri
  • Product colorBlue Cable SAS29P-SATA7P+IDE
  • Connect SAS drives to SAS controllers via SFF-8482 29-pin interface
  • Link SATA drives to SATA motherboards using 22-pin connector
  • Power attached drives through integrated IDE 4-pin port
  • Male-to-female design extends reach inside RAID enclosures
  • Copper conductors support 6 gigabytes_per_second data rate

SAS-to-SATA adapter for mixed drive setups

This cable bridges a SAS drive with an SFF-8482 connector to a SATA host port while supplying power through an IDE four-pin plug. It suits builders who need to attach a single SAS hard disk to a SATA-based RAID controller or motherboard that already includes SAS chipset support. The 29-pin to 22-pin layout carries both data and power in one assembly.

Passive copper link with 6 Gb/s rating

The conductors are copper and the assembly is passive, so it adds no active circuitry or latency to the link. Rated at 6 gigabytes per second, it matches the SATA III and SAS-2 signalling ceiling without drawing extra power beyond the drive itself. Blue jacket colour helps identify the cable in a dense backplane.

Replaces separate data and power leads

It consolidates a SAS data cable and a Molex-to-SATA power adapter into one run, reducing clutter in 2.5-inch or 3.5-inch drive bays. The jump is worthwhile when the host side exposes a SAS-capable SATA port and the drive side uses the SFF-8482 interface. Not for connecting a SAS drive to a plain SATA-only motherboard or a SATA drive to a pure SAS backplane.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $13.99
Typical for this category: the median of 1,954 items is $13.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameCY
Model nameHX-SF-011
Product typeCY SAS Cable SFF-8482 SAS 29 Pin to SATA 22Pin Hard Disk Drive Raid Extension Cable with IDE 4Pin Power Port
Product colorBlue Cable SAS29P-SATA7P+IDE
Performance
Rated speed6 GB/s
Ports & slots
Connector detailsSas Sata
Connector genderMale-to-Female
Size & build
Conductor typeCopper

Questions about this item

How do I plug the SFF-8482 29-pin end into a SAS controller, and which way does the keyed notch face?

Align the SFF-8482 male connector with the controller port so the notch matches the key; push straight in until it clicks — the notch only fits one way.

Does the IDE 4-pin power lead need periodic replacement, or is the copper conductor rated for the life of the drive?

The copper conductors and IDE 4-pin plug are rated for continuous use; no scheduled replacement is required unless physical damage or corrosion appears.

At 6 gigabytes per second, what thermal or signal limit appears first during sustained RAID rebuilds?

The 6 GB/s interface and copper conductors handle sustained RAID rebuild traffic; the first practical limit is usually the drive’s own sustained transfer rate, not the cable.

More in SATA & eSATA Drive Cables

Similar items