We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 90-degree down-angled SATA 22-pin male-to-female adapter

Vszerda

Vszerda SATA Male to Female 90 Degree Down Angled 22Pin Adapter for 2.5/3.5" HDD

SKU CH-WQWG-HBWKD

A 90-degree down-angled SATA male-to-female adapter redirects 22-pin connections for 2.5 and 3.5 inch drives while maintaining 6 Gbps data and 5V/12V power delivery

  • Rated speed6 Gbit/s
  • Connector detailsSata
  • Connector genderMale-to-Female
  • Conductor typeCopper
  • Product type22Pin
  • Key featuresHi Speed
  • 90-degree down angle fits drives where space is tight
  • Male-to-female 22-pin SATA connector redirects the port without speed loss
  • Transfers 5V and 12V power plus 6 Gbps data
  • Supports both 2.5 and 3.5-inch SATA hard drives
  • Angled design improves cable routing for cleaner builds

Right-Angle SATA Adapter for Tight Spaces

This 22-pin SATA male-to-female adapter bends 90 degrees downward, letting you connect 2.5-inch or 3.5-inch drives where a straight plug will not fit. Copper conductors carry both 5 V and 12 V power alongside 6 Gbps data without altering the interface definition. The angled body improves cable routing and keeps wiring tidy inside compact cases or drive cages.

Builders Facing Clearance Limits

Installers working in shallow chassis, behind motherboard trays, or alongside bulky graphics cards gain the extra room they need to seat the drive connector cleanly. The adapter serves any standard SATA hard drive or SSD that uses the 22-pin interface. Builders with ample straight-run space or those needing an upward or sideways bend will not benefit from this fixed downward angle.

Verify Port Orientation and Drive Height

Before ordering, confirm the host SATA port faces a direction that a downward bend can reach without stressing the motherboard header. Measure the vertical gap between the port and any obstruction to ensure the adapter body clears it. Check that your drive uses the standard 22-pin SATA layout and that the connector gender matches a male host port to a female drive plug.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 75% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameChenyang
Model nameCY-SA-121-DN
Product type22Pin
Performance
Rated speed6 Gbit/s
Ports & slots
Connector detailsSata
Connector genderMale-to-Female
Size & build
Conductor typeCopper

Questions about this item

What motherboard port must already be free to plug this 22-pin SATA adapter in?

A standard 22-pin SATA female port on the motherboard or controller card is required to accept the male end of this adapter.

Will this 90-degree down-angled adapter still pass 6 Gbps data and 5 V/12 V power to an older 3.5-inch SATA drive?

Yes, the connector transfers 6 Gbps data and both 5 V and 12 V power without changing the interface definition, so legacy 3.5-inch SATA drives work normally.

How can I confirm the adapter is seated correctly after installation?

The drive should be detected at full 6 Gbps speed in BIOS or OS disk tools, and the angled connector should sit flush in tight spaces without cable strain.

More in SATA & eSATA Drive Cables

Similar items