STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects four SATA drives to a Mini SAS SFF-8087 controller at 6 Gbps over 100 cm
This Vszerda SF-004-1.0M cable connects four SATA hard disks to a single Mini SAS SFF-8087 host port. It is built for internal server and RAID configurations that require a 1-to-4 breakout from a controller. The copper conductors carry data at 6Gbps across a 100cm length.
The decisive specification is the connector pairing: one Mini SAS SFF-8087 male plug on the host side and four SATA 7-pin female receptacles on the drive side. This exact layout lets a single controller port address four separate SATA targets without an expander backplane.
The cable uses copper conductors specified to the SAS 2.1 standard for 6Gbps operation. No additional software, drivers or power adapters are included in the bundle; the accessory change is purely the physical breakout that consolidates four drive connections into one controller slot.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | SF-004-1.0M |
| Product type | Mini-SAS |
| Product color | Copper |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8087 & Sata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Yes — the SFF-8087 host connector follows the SAS 2.1 standard and delivers 6 Gbps per lane, so every attached SATA 7-pin drive can operate at its native 6 Gbps rate.
The cable is built to the SAS 2.1 specification, so its maximum throughput is 6 Gbps per lane regardless of the controller generation.
The 1.0 metre length gives enough slack to reach widely spaced bays in a typical server or workstation chassis.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?