We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SAS 29-pin to SATA 7-pin cable with 15-pin power, 50 cm

Vszerda

Vszerda SF-088-0.5M-XY SFF-8482 SAS 29 Pin to 7 Pin SATA Cable with 15 Pin Power 50cm

SKU CH-V6BB-TEVWV

Connects a SAS drive with SFF-8482 port to a SATA controller while supplying 15-pin power over 50cm of copper cable at 6 Gbps

  • Rated speed6 Gbit/s
  • Connector detailsSas to Sata
  • Connector genderMale-to-Male
  • Conductor typeCopper
  • Product typeSFF-8482 SAS 29 Pin to 7 Pin SATA
  • Product colorWith SATA Power
  • Connects SAS HDDs to SATA controllers via SFF-8482 interface
  • 50 cm cable length suits compact server and workstation builds
  • Integrated 15-pin SATA power connector eliminates separate power cable
  • 6 Gbps transfer speed supports high-throughput storage arrays
  • Male-to-male copper conductors ensure reliable signal integrity

SFF-8482 SAS 29 Pin to 7 Pin SATA Cable

This 50 cm cable connects a SAS hard drive with an SFF-8482 port to a compatible SATA controller. It carries a 7-pin SATA data connector, a 29-pin SAS connector and a 15-pin SATA power connector in one assembly. The copper conductors support 6 Gbit/s transfer rates for RAID or JBOD configurations.

Builders adding SAS drives to SATA controllers

Suits administrators upgrading servers or workstations that use hybrid SATA/SAS controllers with SFF-8482 ports. Not suitable for systems that lack a compatible hybrid controller or for connecting SATA drives to SAS-only backplanes. Buyers needing longer runs or different connector orientations should look at other cable assemblies.

Single 50 cm length with integrated power

The fixed 50 cm length and combined data-plus-power layout determine whether the cable reaches your drive bay and matches the controller pin-out. Verify the controller supports SFF-8482 and that 50 cm fits your chassis routing before ordering.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 55% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJSER
Model nameSF-088-0.5M-XY
Product typeSFF-8482 SAS 29 Pin to 7 Pin SATA
Product colorWith SATA Power
Performance
Rated speed6 Gbit/s
Ports & slots
Connector detailsSas to Sata
Connector genderMale-to-Male
Size & build
Overall length1.6 ft (0.49 m)
Conductor typeCopper

Questions about this item

Should I choose the 50 cm length or a longer cable for my SAS drive?

The 50 cm cable suits typical internal drive-to-controller runs; select a longer version only if your chassis routing demands extra reach.

What does the 6 Gbps speed rating deliver when the cable is installed?

It supports the full 6 Gbps SAS/SATA link rate, so a connected drive operates at its native interface ceiling without cable-imposed bottlenecks.

How does the SFF-8482 29-pin connector limit compatibility with my controller?

The SFF-8482 plug mates only with hybrid SAS/SATA controllers; it will not fit a pure SATA port or a wide-port SAS backplane.

More in SATA & eSATA Drive Cables

Similar items