We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angled SFF-8482 SAS 22-pin to 7-pin plus 15-pin SATA adapter

Vszerda

Vszerda SFF-8482 SAS 22 Pin to 7 Pin + 15 Pin SATA Adapter 90 Degree

SKU CH-NYTH-0FG2Q

Right-angled adapter converts an SFF-8482 SAS 22-pin connector to a 7-pin SATA data and 15-pin power connection for compatible controllers

  • Product typeSATA
  • Product colorBlack
  • Key featuresRight Angled 90 Degree
  • Right-angled 90° design eases routing in tight chassis
  • 22-pin SFF-8482 connector mates with SAS HDDs and SSDs
  • 15-pin power segment supplies drive voltage directly
  • 7-pin SATA data link connects to compatible SAS controller
  • 29-pin SAS interface supports dual-lane SAS signalling

SAS-to-SATA adapter for RAID drives

This Vszerda adapter converts an SFF-8482 SAS 22-pin connection into a standard 7-pin SATA data link and a 15-pin power plug. It targets builders adding SAS hard drives or SAS SSDs to a motherboard or controller that already speaks SAS. The right-angled 90-degree body keeps the cable run tidy inside tight chassis. It does not bridge SAS drives to ordinary SATA-only ports.

No thermal or power concerns

The unit is a passive cable assembly with no active components, so it generates no heat and draws no power of its own. Noise is non-existent because there are no fans or moving parts. The 15-pin section simply passes through the drive's existing power requirements from the host supply.

Fits tight bays, frees straight connectors

The 90-degree SFF-8482 plug lets the cable exit parallel to the drive, clearing low-profile backplanes and crowded drive cages. You need a SAS-capable controller or motherboard with the appropriate chipset; a plain SATA host will not recognise the drive. Conversely, a SATA drive cannot attach to a pure SAS backplane through this adapter. The 29-pin SFF-8482 interface carries two SAS lanes to the drive.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 65% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameXiwai
Model nameSF-095-XY
Product typeSATA
Product colorBlack

Questions about this item

How do I install the right-angled SFF-8482 adapter in a tight case without bending the cables?

Align the 29-pin SFF-8482 end with the drive connector, press straight in until the plastic body seats fully, then route the 7-pin SATA and 15-pin power cables away from the 90-degree bend to avoid strain.

Will the 15-pin power connector need replacement after repeated drive swaps?

The 15-pin male power connector is rated for standard SATA mating cycles; replace the adapter if pins become loose or the plastic housing cracks from frequent insertion.

What throughput limit appears first when the SFF-8482 runs two SAS lanes continuously?

The 7-pin SATA data path and dual 7-pin SAS lanes share the adapter's signal traces, so sustained dual-lane SAS traffic hits the SATA connector's single-lane electrical ceiling first.

More in SATA & eSATA Drive Cables

Similar items