Sabrent EC-SSHD USB 3.0 to 2.5" SATA Hard Drive Adapter
- 4 In
- USB 3.0 to SSD/2.5…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SAS SFF-8482 29+15-pin drive to a SATA 7-pin port with a left-angle cable for tight spaces
This Vszerda cable converts a SAS SFF-8482 29+15-pin interface to a standard SATA 7-pin connector, letting builders attach SATA drives to SAS backplanes or controllers. The 50 cm length suits compact enclosures and rack-mounted chassis where straight cables would obstruct airflow or neighbouring slots.
The left-angle SATA head hugs the drive edge, freeing vertical clearance above the connector so adjacent drives or PCIe cards sit closer without cable stress. It needs a SAS SFF-8482 port on the host side and a SATA power source for the drive; no active electronics are included, so the host must negotiate the link speed.
The adapter passes one SATA device per SAS port, supporting the throughput the host controller and drive negotiate. It does not aggregate multiple SATA drives, split a SAS lane, or provide power conversion, so builders needing multi-drive fan-out or voltage translation must look elsewhere.
Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | SFF8482S29-15P-ST7PL |
| Product type | SAS to SATA |
The SAS SFF-8482 end merges a 29-pin data section with a 15-pin power section into one plug.
The left-angle SATA 7-pin head improves airflow by keeping the cable flat against the board, helping lower temperatures.
Your backplane or controller needs an SFF-8482 SAS port to accept the 29+15-pin connector.
More in SATA, IDE & M.2 Drive Adapters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?