STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SFF-8654 SlimSAS 4i host or RAID port to four SATA drives using silver-plated AWG32 twinax for 100-ohm SAS 3.0 signal integrity
This one-metre internal cable connects an SFF-8654 SlimSAS 4i 38-pin host or RAID port to four SATA 7-pin targets. Silver-plated AWG32 twinax conductors and a 100-ohm SAS 3.0 design preserve signal integrity for server and storage expansion.
Builders attaching up to four SATA hard drives or SSDs to a compatible controller will find this plug-and-play, hot-swap-ready link convenient. It is not suited for connections that require a different host connector, an external eSATA interface, or a wide-port multi-lane SAS target.
The single specification that decides fit is the 38-pin SFF-8654 SlimSAS 4i interface on the host side; the cable only works with controllers or backplanes that expose this exact port.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 10Gtek |
| Model name | CAB-8654/4xSATA-4i-P1M-11 |
| Product type | Internal Mini SAS HD Cable |
| Product color | 1PC |
| Ports & slots | |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Silver |
The cable is supplied at 1 metre (3.3 ft). That length fits typical server chassis and workstation builds where the RAID controller or motherboard port sits close to the drive backplane.
The cable meets SAS 3.0 specifications with 100-ohm impedance, so each of the four SATA lanes can operate at its full 6 Gb/s without signal degradation from the interconnect.
The SFF-8654 38-pin SlimSAS 4i interface carries four lanes; each lane is rated for the SAS 3.0 standard, so the practical ceiling per attached SATA device remains 6 Gb/s.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?