WAWEIS 24V 5A 120W power adapter 5.5x2.1mm
Converts 100-240V AC to 24V 5A DC with 5.5x2.1mm plug, 10ft cord, and overload, over-voltage, short-circuit and overheat protection
- World-wide 100-240 VAC input suits any mains supply
- 120 W output with 5 A at 24 V powers demanding LED strips
- 10 ft total cord length gives flexible placement
- Over-current, over-voltage, short-circuit and over-temperature protections safeguard connected gear
- FCC, CE and RoHS certifications confirm safety compliance
Universal 24 V 5 A adapter
This WAWEIS power adapter converts 100-240 V AC mains input into a regulated 24 V DC output at up to 5 A and 120 W. It is designed for devices such as RGBW 5050, WS2811, 3528, FOB and COB LED strips that require a 5.5 mm by 2.1 mm barrel connector. The unit includes a 10 ft power cord for flexible placement.
Plug-in installation with safety guards
Installation is straightforward: connect the AC cord to a wall outlet and plug the barrel jack into the LED strip or compatible device. Built-in over-current, over-voltage, short-circuit and total-power protection circuits interrupt the output if a fault occurs, reducing the risk of damage to the connected load. The 10 ft cord length allows routing without strain on the connector.
For single 24 V LED strip runs
This adapter suits installers powering a single 24 V LED strip or similar load drawing up to 5 A. Buyers who need more than 120 W total output, multiple isolated outputs, a different barrel size, or a waterproof enclosure should look at other solutions. The fixed 5.5 mm by 2.1 mm plug also limits use with devices that require screw terminals or alternative connectors.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 60% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the adapter is delivering the rated 24 V output after connecting it?
Use a multimeter set to DC volts and measure across the 5.5 × 2.1 mm barrel plug; a reading near 24 V confirms the unit is operating within specification.
What cables and connectors are included, and is anything else required to power a 5050 LED strip?
The adapter ships with a 10 ft AC cord and a fixed 5.5 × 2.1 mm DC plug; you only need a matching barrel jack on your strip or a separate pigtail to complete the connection.
Which version should I choose for a WS2811 strip that draws 4 A?
Select the 24 V 5 A 120 W model — its 5 A rating covers the 4 A load with headroom, and the 5.5 × 2.1 mm plug fits standard WS2811 controllers.
More in AC Adapters & Power Bricks
