STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a Slim SAS 4.0 SFF-8654 8i port to eight SATA drives at 12 Gbps with locking latches and a 100 cm length
This 1 metre cable connects a single SFF-8654 8i 74-pin port to eight SATA 7-pin devices. It supports SAS 4.0 signalling at 12Gbps and uses 30AWG conductors inside a flexible protective sleeve. A locking latch on each SATA connector secures the link against vibration.
Suits servers or workstations that expose an SFF-8654 8i interface and need up to eight SATA drives. The half-wrap scoop-proof design eases insertion in dense chassis. Installations requiring internal PCIe or U.2/U.3 direct attach cannot use this cable.
The 12Gbps specification determines whether the link can saturate modern SAS SSDs or HDDs without signal degradation. If the host controller or backplane only negotiates 6Gbps, the cable will still function but at the lower speed.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
| Performance | |
| Rated speed | 12 Gbit/s |
| Ports & slots | |
| Connector count | 9 |
| Connector details | SFF-8654 8i 74Pin to 8 x SATA 7Pin |
| Connector gender | Male to Female |
| Size & build | |
| Overall length | 1 meter |
| Conductor gauge | 30 AWG |
The cable carries data only at 12 Gbps; power for the eight SATA drives must come from the host backplane or power supply, not through this 30 AWG assembly.
A Slim SAS 4.0 SFF-8654 8i 74Pin receptacle with a locking latch is required; the male plug on this cable engages that port directly.
Yes, the SAS 4.0 interface auto-negotiates link speed, so legacy 6 Gbps and 3 Gbps SATA drives operate at their native rates through the eight 7-pin connectors.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?