PYLE AUDIO PLMRCW3 marine electronic 9.18 x 4 x .5 white
- 4 in × 9.18 in × 0.…
- Accessories
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.5" sunlight-readable colour LCD fish finder with dual 200/83 kHz sonar, 0.6–80 m depth range and multi-language menus
The WUQ FF688C is a portable marine receiver built for anglers who need real-time depth, bottom contour and water temperature data on inland or coastal waters. Its 3.5″ 18-bit TFT sunlight-readable display shows V320 × H240 resolution with white LED front lighting for clear visibility in bright conditions. The unit operates on DC input power and includes a battery strength indicator for extended sessions on the water.
This model replaces basic single-frequency sounders by adding 200KHz/83KHz dual beam sonar, giving 800 watts maximum output power and 100 watts RMS for detection from 0.6m to 80m (2ft to 240ft) in 1/10th precision. The jump is worth it when you need to distinguish grass, sand or rock bottoms, suppress weed interference in lakes, and identify big versus small fish icons with audible alarms set between 3ft and 99ft. Auto zoom bottom tracking and quick manual zoom let you focus on the strike zone instantly.
Mounting the transducer on the transom or hull is straightforward for most small craft, and the multi-language menu (English, Russian, French, Chinese, Japanese, Finnish, Polish, German, Italian, Spanish, Dutch, Korean, Swedish, Greek, Danish) simplifies first-time setup. The main caution is that the control buttons are not waterproof, so the head unit must be sheltered from direct spray or rain. Users should also verify the DC voltage matches their boat supply before wiring to avoid power issues.
Measured against everything we stock in Boat Audio & Electronics, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Marine Receiver |
The unit fits a standard 3.5 inch panel opening and runs on DC input power; connect the supplied cables to a marine battery and secure the bracket with the included hardware
Mount the transducer on the transom or through the hull, run its cable to the display, then select 200 kHz or 83 kHz in the menu; the step often missed is setting the depth range to match the water you are fishing
Rinse the transducer with fresh water after each trip, check the cable for cuts, and replace the transducer if the 200 kHz or 83 kHz signal drops out or the bottom reading becomes unreliable
More in Boat Audio & Electronics
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?