We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four clear PETG tubes, 10mm inner diameter, 14mm outer diameter, 50cm each

XSPC

XSPC TR-5060175585943-4P PETG Tubing 10mm ID 14mm OD 50cm 4-pack diy cooling

SKU CH-XWWT-G7T41 MPN TR-5060175585943-4P

Clear PETG tubing with 10 mm inner and 14 mm outer diameter, 2 mm wall thickness, supplied as four 50 cm lengths for custom liquid cooling loops

  • Product typeTubing
  • High transparency shows coolant flow clearly
  • 2mm wall thickness resists kinking during tight bends
  • 10mm inner diameter fits standard compression fittings
  • 14mm outer diameter matches common hard-tube sizing
  • Four 50cm lengths give two metres of tubing

PETG Tubing for Custom Loops

XSPC PETG tubing provides clear 10mm inner diameter and 14mm outer diameter channels for DIY liquid cooling builds. The 2mm wall thickness resists deformation while bending. Each pack supplies four 50cm lengths for routing between components.

Thermals Noise and Power Draw

As passive tubing the product generates no noise and draws no power. Thermal performance depends on the coolant and radiator chosen by the builder. The thick wall helps maintain consistent flow without kinking under normal loop pressure.

Upgrade Path and Value

Replaces softer or thinner-walled tubing that can collapse on tight bends. The jump is worth it when a builder needs reliable transparency and kink resistance for complex routing. Not for users who require pre-bent rigid tubes or colour-tinted options.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 67% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameXSPC
Product typeTubing

Questions about this item

How do I install the 14mm OD PETG tubing without kinking the 2mm wall?

Warm the tube gently with a heat gun, then push it fully onto the 10mm ID barb until it seats against the fitting collar; the thick wall resists collapse if you avoid sharp bends.

What maintenance will the clear PETG tubing need over time?

Inspect the 50cm runs every few months for cloudiness or plasticiser buildup; flush the loop with distilled water and replace any length that stays hazy after cleaning.

What limit appears first when the 10mm ID tubing runs under sustained heat?

The 2mm wall softens above 60 °C, so prolonged high coolant temperatures can cause the 14mm OD tube to deform or lose its seal on the fitting.

More in Heatsinks & Water Blocks

Similar items