YEPLOOK PCIe Dual 8Pin 6+2Pin Pigtail GPU Cable Corsair HX-i Type 3 0.60m

PCIe GPU Cable for Corsair HX-i Type 3 PSUs

This internal power cable connects Corsair HX1200i, HX1000i, HX850i and HX750i Type 3 modular power supplies to a graphics card. It is intended for builders and technicians who need a direct replacement or an additional GPU power lead for those specific units. The 0.60 m length suits compact routing inside standard chassis. It is not for owners of Corsair Type 1, Type 2 or Type 5 power supplies, nor for any other brand of modular PSU.

18AWG UL1007 wire with flexible flat layout

The cable uses 18AWG tin-plated copper conductors rated to 300 V and an operating range of -30 °C to 80 °C. A flat profile makes bending and cable management straightforward, reducing clutter behind the motherboard tray. One PSU-side 8-pin plug feeds two PCIe 6+2-pin connectors in a pigtail arrangement, with 34 inner wires in total. An unused pin on the PSU connector is a normal design feature, not a defect.

Dual 6+2-pin pigtail for single-cable GPU power

The splitter delivers two 6+2-pin PCIe ends from one PSU port, allowing a graphics card with dual 8-pin or 6-pin sockets to be powered without a second cable run. The 2-pin sections slide on or off to match 6-pin or 8-pin requirements. Compatibility is limited to the listed Corsair HX-i Type 3 models; using it with other units can cause damage.