We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with one Toslink input and two outputs

YINGHUA

YINGHUA 1×2 Toslink Optical Audio Splitter KVM Switch

SKU CH-WVSR-Y1763

Splits one Toslink optical audio source to two outputs supporting LPCM 2.0, DTS and Dolby Digital with signal retiming up to 40 m

  • Product typeHDMI
  • Splits one optical source to two amplifiers
  • Supports LPCM 2.0, DTS and Dolby-AC3 formats
  • Signal retiming keeps audio clear up to 40 m
  • Over-voltage protection guards against mismatched adapters
  • Ready in minutes with a DC 5 V 500 mA supply

Optical Audio Splitter for Dual Amplifiers

This YINGHUA 1×2 Toslink splitter takes a single SPDIF optical source and routes it to two receiving devices such as amplifiers or soundbars. It supports LPCM 2.0, DTS and Dolby-AC3 formats without degrading the digital signal. The unit requires a DC 5 V 500 mA power supply and installs in minutes.

Suitable for Stereo and Multi-Room Setups

Buyers who need to feed one optical output from a console, DVD player or set-top box into two separate audio zones will find this device fits the task. It does not switch between multiple sources, so users who require input selection should look at a matrix switch instead.

Signal Integrity Over Extended Runs

The splitter retimes the optical signal and works with fibre cable loss below 0.2 dB/m, allowing output distances up to 40 m at a peak wavelength of 650 nm and a maximum baud rate of 16 Mbps. Over-voltage protection guards the circuitry if an incorrect power adapter is connected.

How it compares

Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.

Price $57.99
Cheaper than about 70% of the 4,010 comparable items (median $105.49).

Specifications

Product
Product typeHDMI

Questions about this item

What source device with a Toslink optical output do I need to feed this splitter?

Any device that provides a digital optical SPDIF signal — such as a PS4, DVD player, HDTV, set-top box, VHS or VCR — can serve as the single input source.

Will my existing Toslink cables work with the 650 nm wavelength and 16 Mbps baud rate of this unit?

Yes, standard Toslink cables rated for 650 nm and up to 16 Mbps are compatible; keep each run under 40 m and cable loss below .2 dB/m for reliable operation.

How can I verify the splitter is passing LPCM 2.0, DTS or Dolby Digital correctly after installation?

Check that both connected amplifiers or receivers display the expected audio format and that sound plays without dropouts on each output.

More in KVM Switches & Rack Consoles

Similar items