ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
LGA2011-V3 server board kit with E5-2673 V3 CPU, four DDR3 slots up to 128 GB, M.2 NVME, PCIe 3.0 x16 and SATA 3.0
The YINGHUA X99H motherboard kit includes an E5-2673 V3 processor, switch cable and SATA cable. It fits LGA2011-V3 sockets and provides four DDR3 memory slots, one M.2 NVME interface, SATA 2.0 and 3.0 ports, plus USB 2.0 and 3.0 connections. The board suits builders assembling a compact server or workstation on a B85 chipset platform.
All-solid-state CPU power delivery aims to keep voltage stable during extended compute tasks. Four DDR3 channels accept up to 128 GB total when populated with 32 GB modules running at 1600 MT/s. The single PCI Express x16 slot and M.2 NVME interface maintain bandwidth for storage and expansion under continuous throughput.
Verify that your chassis can accommodate the motherboard form factor and that the power supply provides the required CPU and board connectors. Memory must be DDR3; server and consumer modules cannot be mixed in the four slots. The kit supports the listed E5 V3 CPUs only; other processors are not validated by the supplier data.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Processor | |
|---|---|
| Processor | Intel Atom |
The board uses an all-solid-state CPU power design with the B85 chipset; sustained load will draw typical E5 V3 power and requires adequate case airflow.
You need DDR3 modules running at 1600; the board takes up to 32 GB per slot for 128 GB total and server or ordinary DDR3 can be used but not mixed.
Yes, the board provides two SATA 2.0 ports, one SATA 3.0 port and one M.2 NVME interface so older SATA drives and a new NVME drive can run together.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?