zdyCGTime BU-050 SATA 15-pin male to dual 4-pin Molex female power cable 30 cm red 2-pack
Converts a 15-pin SATA male connector to two 4-pin Molex female sockets for powering SATA drives from legacy supplies
- Connector detailsSata
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorRed
- Overall length30
- Power SATA drives from legacy Molex supplies
- 15-pin male plug splits to two 4-pin female Molex
- 18 AWG pure copper cores for stable current
- 30 cm red PVC jacket keeps builds tidy
- Two cables included for multiple device installs
Purpose and audience
This Y-splitter cable converts a single SATA 15-pin male power connector into two Molex 4-pin female connectors. It is intended for builders who need to power SATA hard drives or SSDs from a power supply that only provides legacy Molex outputs. The 30 cm length suits tight routing inside compact chassis.
Build and connectors
Each cable uses 18 AWG pure copper conductors inside a red PVC jacket. The SATA male plug and dual Molex female sockets are moulded for secure mating and repeated insertion cycles. The short, stiff pigtail keeps the split point close to the drive bay, reducing cable clutter and strain on the power supply’s native connectors.
Deciding specification
The critical figure is the 15-pin SATA male to dual 4-pin Molex female pinout, which delivers both 5 V and 12 V rails to SATA devices. If your power supply lacks native SATA power leads, this adapter provides the required voltages; if your supply already has enough SATA connectors, the cable adds no benefit.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 65% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ZdyCGTime |
| Model name | BU-050 |
| Product type | SATA |
| Product color | Red |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What does the SATA 15-pin male connector support on this cable?
The 15-pin SATA male end plugs into a SATA power port on the power supply, delivering 12 V and 5 V rails to SATA hard drives or SSDs through the two Molex female branches.
What clearance does the 30 cm red cable need inside the case?
At 30 cm the Y-splitter reaches from a bottom-mounted PSU to mid-tower drive bays; the PVC jacket adds minimal bulk so it routes behind the motherboard tray or along standard cable channels.
How do I connect the dual 4-pin Molex females without reversing polarity?
Each Molex 4-pin socket is keyed — align the chamfered corners with the drive’s header, press straight in until the latch clicks, and verify both 12 V and 5 V pins seat fully before powering on.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
NShi USB 3.0 to 2.5" SATA III adapter cable black 1.2 ft
- 1.2 ft (0.37 m)
- Cable Connectors
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Bailink 3-pack SATA cable 50 cm red 180° latch 6 Gbps
- 50 cm
- 3 pack High Perform…





