Kanto SUB8VMW 8-inch 300W Sealed Powered Subwoofer White home audio speaker
- Single
- 300 W Peak Power
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A three-pack of in-wall centre-channel speakers with dual 6.5" woofers and a 12mm soft-dome tweeter, covering 33Hz-22kHz at 98dB sensitivity and mounting flush
This three-piece set provides a centre channel plus matching front left and right speakers for a complete front soundstage. Each unit uses dual 6.5 inch woven-fibre woofers and a 12mm soft-dome tweeter in a traditional passive design. The speakers are powered by any home audio receiver or amplifier with raw speaker wire outputs. They are built for flush-mount in-wall installation in home theatre rooms.
The Pressure Lock Mounting System clamps each speaker to drywall without separate hardware, fitting a rectangular cut-out of 19.21 by 7.4 inches and a mounting depth of 3.03 inches. Overall dimensions are 20.47 by 8.66 inches. Durable ABS housings and removable grilles can be painted to match the surrounding décor. Spring-loaded raw wire terminals accept CL3-rated in-wall speaker cable for a clean connection.
Verify that your receiver or amplifier delivers between 10 and 350 watts per channel into 8 ohms to match the speaker's 98dB sensitivity and 33Hz to 22kHz frequency response. Confirm the wall cavity can accommodate the 19.21 by 7.4 inch cut-out and 3.03 inch depth before cutting drywall. Buyers who need a powered or wireless solution, or who cannot run CL3-rated wire inside walls, should consider alternative speaker types.
Measured against everything we stock in Home Speakers & Subwoofers, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Acoustic Audio by Goldwood |
| Product type | Center Channel Speaker |
The passive design has no active electronics to wear out; the woofers use butyl rubber surrounds that resist rot, so only physical damage would require driver replacement.
Your amplifier must not exceed 350 watts per channel; beyond that the speaker’s 100-watt minimum and 350-watt maximum rating becomes the limiting factor.
As a passive unit it generates no fan noise or amplifier heat; only the amplifier in your rack produces warmth, while the speaker itself stays silent.
More in Home Speakers & Subwoofers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?