ADCAUDX DC-0045 3 Pack SATA 6Gbps Cable 3.3Ft Blue
Three blue SATA 6Gbps data cables, each 3.3 ft long with locking latches, connect drives to motherboards for 6 Gb/s transfer
- Rated speed6 Gbit/s
- Connector detailsSata 7 Pin
- Connector genderFemale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorBlue
- Three-metre reach lets you route cables cleanly behind motherboard trays
- 6 Gbps SATA III bandwidth keeps SSD and HDD transfers at full speed
- Locking latch on every connector prevents accidental disconnects under vibration
- Thin 30 AWG conductors improve airflow in tight server chassis
- Three colour-coded cables simplify RAID or multi-drive identification
Three-cable SATA 6Gbps kit
This pack contains three blue SATA III data cables, each 3.3 feet long, designed to link motherboards or host controllers to hard drives, SSDs, optical drives or RAID controllers. The cables carry data only and do not supply power, so each drive must be powered separately. They are suited for builders adding multiple drives to a server, workstation or desktop where extra length helps routing. Buyers who need combined data-and-power cables or single-cable purchases will not find those here.
Thermals noise and power draw
The cables are passive copper conductors with 30 AWG gauge and generate no heat, noise or power draw of their own. They simply transmit signals between the host and the attached storage device. Because they draw no power, they do not affect system thermals or fan behaviour. Installers should still allow airflow around the cable runs, but the cables themselves add no thermal load.
Locking latch and labelled ends
Each connector features a locking latch that secures the connection against vibration or accidental disconnection during drive swaps. The three cables are marked P1, P2 and P3 to simplify routing in multi-drive arrays or RAID setups. No driver or software installation is required; the cables work immediately when plugged into any standard SATA 7-pin port.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0045 |
| Product type | SATA |
| Product color | Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata 7 Pin |
| Connector gender | Female-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I install the DC-0045 cable and which step is often missed?
Align the 7-pin female connector with the motherboard or controller port, press straight in until the locking latch clicks, then verify the latch is fully engaged — the click is the step many skip.
What maintenance or replacement will the DC-0045 cable need later?
No scheduled maintenance; inspect the latch and 30 AWG conductors during hardware changes and replace any cable with a damaged latch or kinked jacket.
What limit appears first on the DC-0045 cable under sustained use?
The 6 Gbps SATA interface caps throughput, so sustained transfers cannot exceed that rate regardless of cable length or 30 AWG construction.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III





