We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided cables each splitting one 4-pin female into three male connectors

aibileec

aibileec PWM Fan Splitter Cable 1-to-3 10 in Black 2 Pack

SKU CH-9AGQ-YE5RC

Connects three case fans to one motherboard header with a 10-inch braided cable; only the 4-pin connector reports RPM while 3-pin fans run at full speed

  • Cable length10 in (25.4 cm)
  • First connector1x TX4 female
  • Second connector3x TX3/TX4 male
  • Connector count4
  • Product typeFan power splitter cable
  • Product colorBlack
  • Splits one motherboard header into three fan connections with a single 10 in cable
  • One 4-pin and two 3-pin outputs let you mix PWM and voltage-controlled fans
  • Sleeved black braiding protects wires and simplifies cable routing inside the case
  • Only the 4-pin fan reports RPM so the board can monitor a single speed signal
  • All attached fans follow the same PWM curve for synchronised speed control

Connect Three Fans to One Header

This PWM fan splitter cable connects a single four-pin motherboard header to three case fans. One branch carries a full four-pin connector for RPM monitoring while the other two use three-pin plugs. The ten-inch length keeps routing tidy inside compact builds.

Sleeved Cable Simplifies Routing

Black braided sleeving protects the wires and makes cable management easier behind the motherboard tray. The splitter draws all fan power from the single header, so the board must supply enough current for the combined load. No extra power connectors or adapters are required.

Ideal for Unified Speed Control

Builders who want all three fans to spin at the same PWM duty cycle will appreciate the shared signal design. Users needing independent speed curves per fan or RPM feedback from every unit should look at a fan controller with multiple headers instead.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAibileec
Product typeFan power splitter cable
Product colorBlack
Ports & slots
First connector1x TX4 female
Second connector3x TX3/TX4 male
Connector count4
Size & build
Overall length10 in (25.4 cm)
Cable length10 in (25.4 cm)

Questions about this item

How many fans can draw power from a single motherboard header using this splitter?

The splitter connects three fans to one header, but only the fan on the 4-pin connector reports RPM data to the motherboard for monitoring.

Do all three fans share the same PWM speed curve when the system is under continuous load?

Yes, every connected fan follows the identical PWM signal so they ramp together, though 3-pin fans will ignore the signal and run at full speed.

Which motherboard headers accept the female connector on this cable?

The 4-pin female end plugs into any standard CPU_Fan or SYS_Fan header on the motherboard.

More in Internal PSU & Riser Cables

Similar items