Aomoproing SATA 15-pin to 3x TX3 / TX4 PWM fan sleeved power splitter cable 10 inch black
SATA-powered splitter runs two 3-pin or 4-pin fans from one PSU connector with 10-inch sleeved cables
Style PWM 1x3
- PWM 1 x2$7.99
- PWM 1x3$6.99
- PWM 1x4$8.99
- PWM 1x5$10.99
- Powers three fans from one SATA connector
- 10-inch sleeved cable keeps builds tidy
- 22 AWG copper cores deliver reliable 12 V power
- 15-pin SATA plug fits standard PSU cables
- Two-pin energised design runs fans at full speed
Power delivery via SATA
This cable draws 12 V directly from a power-supply SATA connector and splits it to two female fan headers. Only two pins on each header are energised, so the fans receive constant voltage without PWM speed control or tachometer feedback. It is intended for builders who want a simple always-on cooling addition.
Header compatibility check
Verify that your case fans use standard 3-pin or 4-pin connectors and that you are prepared for them to run at full speed continuously. The cable cannot regulate fan speed, so it is unsuitable for systems that rely on motherboard or controller-based PWM curves.
Sleeved 10-inch extension
The black sleeved jacket protects the 22 AWG copper wires and keeps the 10-inch run tidy inside the chassis. No software or additional adapters are included; the cable simply extends the reach of the PSU SATA power port to the fan locations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
3 more in the same range
Aomoproing SATA to 4 x 3-pin / 4-pin fan splitter cable 10 inch black
Aomoproing SATA to 2x 3-pin / 4-pin fan sleeved power splitter cable 10 inch black
Questions about this item
Does the cable come with the three PWM fans or do I need to buy them separately?
Only the splitter cable is included; the three TX3 / TX4 PWM fans must be purchased separately.
The title mentions three fan headers but the specifications list two — which version is correct?
The cable provides two fan female connectors, not three, so you can attach up to two 3-pin or 4-pin fans.
Since only two pins are energised on each fan header, will the motherboard still report fan speeds?
No — with only power and ground active, the PWM control and tachometer lines are not connected, so speed reporting and throttle control are unavailable.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs SATA18BK90 SATA cable 18 inch 90 to 180 degree latching
- 18 in (45.7 cm)
- Cable Connectors
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
EN-Labs SATA18UVGN-3PACK 3-pack 18 inch SATA cable
- 1.5 ft (0.46 m)
- Cable Kits








