Aomoproing SFF-8643 to 4x SATA breakout cable 3.3 ft
Connects a Mini SAS HD SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives using a labelled 3.3 ft breakout cable
Cable Length 3.3 Feet
- 1.64 Feet$11.99
- 3.3 Feet$12.99
- Connects RAID controller to four SATA drives
- SFF-8643 host end plugs into motherboard or controller
- Four 10-pin SATA targets support SATA I and II drives
- 3 ft length suits internal chassis routing
- Labeled breakout ends simplify cable management
Aomoproing SFF-8643 to 4x SATA breakout cable 3.3 ft
This internal cable connects a Mini SAS HD SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. It uses UL-listed 12Gb raw SAS cabling and labelled breakouts for easier cable management. The 10-pin SFF-8643 connector is the host side, while the four 7-pin SATA connectors are targets for storage devices.
Compatibility checklist before ordering
Verify that your motherboard or RAID controller provides a Mini SAS HD SFF-8643 host port. The cable will not work if the SFF-8643 port sits on a backplane or if the connector is the SFF-8646 variant. Data transfer speed depends on the capabilities of the SAS controller and the SATA drives installed.
Replaces generic unlabelled fan-out cables
The labelled SATA breakouts and locking connector latches simplify identification and provide a more secure fit than unmarked alternatives. The jump is worth it when building or expanding a storage array that requires clear port mapping and a reliable host-to-target link.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SFF86434 12G Mini SAS SFF-8643 to 4 SATA Cable 1.64ft
Questions about this item
What connectors are included and do I need anything else to attach four SATA drives?
The cable has one SFF-8643 Mini SAS HD plug for the controller and four labelled SATA 7-pin female connectors for the drives; no extra adapters are required.
Which Mini SAS version should I check for on my motherboard or RAID controller?
Verify the port is SFF-8643; the cable will not work with SFF-8646 backplane connectors.
What does the 12 Gb raw cable rating mean for my actual transfer speed?
Real-world throughput depends on your SAS controller and the SATA I, II or III drives attached — the cable itself supports up to 12 Gb/s per lane.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
COMeap SATA power cable 6 pin to 3×15 pin 20 in 50 cm
- 6 Pin, Sata 15 Pin
- SATA
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Sabrent CB-SRK3 SATA III 6 Gbit/s right-angle locking data cable 20" 3-pack black
- Optical
- SATA










