We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aomoproing SFF-8643 to four SATA cable, 1.64ft, woven mesh sheath, P1-P4 markers

Aomoproing

Aomoproing SFF86434 12G Mini SAS SFF-8643 to 4 SATA Cable 1.64ft

SKU CH-48R4-R4Q5S

Connects a 12G SAS controller to four SATA drives over a 1.64ft cable with latch-locking connectors and strain relief

Cable Length 3.3 Feet

  • Connects a 12Gbps RAID controller to four SATA drives
  • 36-pin SFF-8643 host connector with latch locking
  • Four 7-pin SATA target connectors with stainless steel latches
  • 64ft slim ribbon cable with acetate cloth tape strain relief
  • Woven mesh sheath on half the cable for easier routing

Connect 12 Gbps RAID to Four SATA Drives

This cable links a 12 Gbps host or RAID controller with an SFF-8643 port to four individual SATA hard drives or SSDs. It is built for internal use in servers or workstations that need to break out a single high-density connector to multiple drive bays. The hybrid design supports 3 Gbps and 6 Gbps devices while migrating to a 12 Gbps storage network.

Suits Adaptec RAID 71605 and 7895 Controllers

Builders with an Adaptec RAID 71605 or 7895 storage controller can plug this cable straight in for a secure, latched connection to four SATA targets. It is not suited for external enclosures or for controllers that lack an SFF-8643 host port. Systems requiring more than four drive connections per cable will need additional links.

1.64 ft Forward Breakout with Latched SATA Ends

The assembly measures 1.64 ft from the 36-pin SFF-8643 male host connector to the four 7-pin SATA female target connectors. Each SATA end carries a stainless steel latch for a firm lock, and P1 to P4 markers simplify drive identification after installation. A woven mesh sheath covers half the ribbon length to aid routing, while acetate cloth tape provides strain relief without adding rigidity.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $16.99
Pricier than about 63% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Questions about this item

Does the package include the four SATA drives or only the cable with SFF-8643 and four SATA connectors?

Only the cable is supplied — one SFF-8643 male connector with latch locking and four SATA female connectors with latch locking — drives must be purchased separately

When should I choose this 1.64 ft forward cable over a longer or reverse version?

Choose this length when the RAID controller and backplane are close together in the same chassis and the controller uses an SFF-8643 host port driving four SATA target drives

What does the 6 Gbps per lane rating mean once the cable is installed with a 12 Gbps controller?

Each of the four SATA lanes runs at up to 6 Gbps; the hybrid design lets a 12 Gbps controller negotiate down to the SATA limit while keeping the SFF-8643 link active

More in SATA & eSATA Drive Cables

Similar items