We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal box with BNC connectors and 12V power supply included

Bluecctv

Bluecctv 102H 1 in 2 out Video Distribution Amplifier Booster

SKU CH-9167-XTFKH

Splits one HD-CVI, TVI or AHD camera signal into two amplified outputs with up to 500 m input reach at 720p and 200 m at 1080p, plus 100 m output range, and includes a 12 V power supply

  • 1 input splits to 2 outputs for multi-point monitoring
  • Amplifies 720p signals up to 500 m input distance
  • Amplifies 1080p signals up to 200 m input distance
  • Extends each output run up to 100 m
  • 12 V power supply included for immediate operation

Purpose and fit

The Bluecctv 102H is a 1 in 2 out video distribution amplifier for HD-CVI, TVI and AHD signals. It suits installers who need to split one camera feed to two recorders or monitors across separate floors or electrical zones. It is not for IP cameras or buyers who need more than two outputs from a single source.

Thermals noise and power

The unit ships with a 12 V power supply and draws minimal current in normal operation. No fan is present so the device runs silently, making it suitable for ceiling voids or equipment cabinets where noise must stay low.

What the bundle changes

The included 12 V supply removes the need to source a separate adapter and ensures correct voltage for the amplifier stage. With the booster active, 720p signals can travel up to 500 M on the input side and 1080p up to 200 M, while each output reaches 100 M without extra repeaters.

How it compares

Measured against everything we stock in Camera Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $49.99
Pricier than about 70% of the 1,144 comparable items (median $24.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 12 V power supply that comes with the 102H so the amplifier actually boosts the signal?

Plug the included 12 V supply into the unit's power jack, run one coax from the camera to the single input, then feed the two outputs to your DVR or monitors; the booster only activates when the supply is live.

Will I ever need to replace the 12 V power supply or the coax cables on the 102H?

The 12 V supply is the only replaceable part — swap it if voltage drops — while the coax runs should be re-terminated or replaced once signal loss exceeds the 100 m output limit.

At what cable length does the 102H stop delivering a clean 1080p picture on the output side?

The amplified outputs are rated for 100 m maximum; beyond that distance the 1080p signal degrades even though the input can reach 200 m at that resolution.

More in Camera Mounts & Add-Ons

Similar items