We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8643 to four SATA 90-degree cable 3.3ft

BUCIER

BUCIER Mini SAS SFF-8643 to 4x SATA 90° cable 12Gb 3.3ft

SKU CH-THVF-R3W3C

Connects a 12 Gb Mini SAS SFF-8643 host port to four SATA drives with 90-degree connectors for tight spaces over a 3.3 ft length

Cable Length 3.3 Feet

  • Connects a Mini SAS host to four SATA drives
  • 12 Gb/s transfer rate for high-throughput storage
  • 90-degree SATA plugs ease routing in tight spaces
  • 3 ft length suits standard chassis layouts
  • SFF-8643 connector enables dense internal port layouts

Connection Type

This BUCIER cable links a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. The 90-degree SATA connectors help routing in tight chassis spaces. It supports 12 Gb SAS signalling for high-throughput storage arrays.

Upgrade Path

The assembly replaces older 6 Gb SAS-to-SATA breakout cables when the host side uses the denser SFF-8643 interface. The jump is worth it when the controller and drives both operate at 12 Gb and the backplane is not the connection point.

Target Builder

Suits administrators wiring internal drive bays directly to a RAID card with SFF-8643 ports. Not for installations where the SFF-8643 connector sits on a backplane or expander, as the host-target orientation prevents that topology.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 78% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Questions about this item

What clearance does the 90-degree SATA connector need at the drive end?

The right-angle SATA plugs extend roughly 12 mm from the drive edge, so allow at least that much space behind each 3.5" or 2.5" bay.

Which side of the SFF-8643 plug goes to the controller and which to the backplane?

The SFF-8643 end is wired as host; plug it into the motherboard or RAID controller Mini SAS port, not into a backplane.

When should the cable be replaced in a 12 Gb SAS environment?

Replace it if the latch tabs crack, the 90° moulding splits, or intermittent link errors appear on any of the four SATA lanes.

More in SATA & eSATA Drive Cables

Similar items