BUCIER Internal Mini SAS to SATA Reverse Breakout Cable SFF-8087 3.3 Feet
Connects a SATA motherboard or RAID card to a Mini SAS backplane with four 3.3 ft reverse breakout cables supporting 6 Gbps per drive
Cable Length 3.3 Feet
- 1.6 Feet$17.99
- 3.3 Feet$23.99
- Reverse breakout links SFF-8087 backplane to SATA motherboard ports
- Four equal-length SATA cables with locking latches prevent accidental disconnection
- Up to 6 Gbps per drive for RAID controller performance
- Acetate tape and woven mesh sheath simplify internal routing
- Low-profile SATA connectors with grip treads reduce vibration disconnects
Internal Mini SAS Reverse Breakout Cable
The BUCIER internal cable connects a motherboard or RAID controller with SATA ports to a SAS backplane or expander using a Mini-SAS SFF-8087 interface. It provides a 3.3 feet reverse breakout link for internal storage configurations.
Verify Host and Target Port Types
Confirm your motherboard or RAID card exposes 7-pin SATA connectors as the host side. The backplane or drive cage must accept an SFF-8087 Mini-SAS target connector for the cable to function correctly.
Four SATA Drives Per Single Backplane Port
The multilane design routes four discrete SATA drive connections into one Mini-SAS port, freeing expansion slots on the controller. Low-profile SATA connectors with latches reduce vibration disconnects while the woven sheath eases routing inside the chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 81% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
BUCIER Internal Mini SAS to SATA Reverse Breakout Cable SFF-8087 3.3 Feet 1.6 ft
BUCIER SFF-8087 to 4x SFF-8482 SAS breakout cable .5 m with SATA power
Questions about this item
Does the package include anything besides the cable itself?
The cable is the only item supplied; no brackets, screws or additional adapters are included.
Which connector version should I pick for a Mini SAS SFF-8087 backplane?
The cable uses a single SFF-8087 target connector that plugs directly into the backplane.
What does the 6 Gbps per drive rating mean once the cable is installed?
Each of the four SATA lanes can transfer data at up to 6 Gbps when connected to a compatible controller and backplane.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
HP 361391-001 Internal Cable for CD-ROM and Diskette 5 ft
- 5 ft (1.52 m)
- Data Transfer Cable
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
2-Power SATA to USB 3.0 Adapter with 12V 2A Power Supply (Red)
- 5 Gbit/s
- Red










