BUCIER SATA Cable III 3-Pack 6Gbps Straight 180° Locking Latch 18 Inch Green
Three-pack of green SATA 3.0 cables with straight 180° locking connectors, 18 inches long for internal drives
- Product colorGreen
- Fast 6 Gbps transfers for quick file moves
- Locking latch on both ends keeps cables secure
- Straight 180° connectors fit tight drive bays
- Three green cables in one pack for spares
- Backwards compatible with SATA I and II
SATA III 6 Gbps cable pack
This three-pack supplies straight 180-degree SATA cables rated for the 3.0 revision and 6 Gbps maximum throughput. Each 18-inch cable has a locking latch on both ends to keep the connection firm inside a case. The set is intended for linking motherboards or host controllers to internal hard drives, SSDs and optical drives.
Builders adding or replacing drives
The cables suit anyone expanding storage or refreshing older leads in a standard desktop. They are not for external eSATA enclosures, slimline laptop bays or right-angle routing needs. Buyers who require angled connectors, longer runs or coloured cable management sleeves should look at other options.
Check motherboard ports and drive spacing
Verify that your board and drives use standard 7-pin SATA data sockets and that an 18-inch straight run reaches without tension. Confirm the locking latches have clearance beside adjacent headers or large coolers. Ensure the target devices support SATA 3.0 to obtain the rated speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $17.99
- Pricier than about 67% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Green |
Questions about this item
What motherboard header do I need to plug these 18-inch SATA cables into?
A standard internal SATA port on the motherboard or host controller.
Will these cables run at full speed if my drive only supports SATA II?
They are backwards compatible with SATA I and SATA II, so the link will negotiate at the drive's maximum rate.
How can I confirm the locking latches on both 180-degree connectors are seated correctly?
Each latch clicks into place; a firm tug on the cable should not pull the connector free.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA3-1.5FT-BK-10P SATA cable 1.5 ft 10 pack
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
EN-Labs SFF80884SATA1M Mini SAS 36Pin SFF-8088 Male to 4 SATA 7Pin Female Cable 3.3ft
- 3.3 ft (1.01 m)
- Mini SAS
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
TeKit eSATAp to SATA 22pin & IDE 4pin 5V 12V Cable 50cm/1.6ft
- 1.64 ft (0.5m)
- eSATAp Power ESATA…





