Cable Leader 18in Cat6 Network Ethernet Cable White

Ready for Cat6 patching

This 18in Cat6 patch cable provides a short, reliable wired link between a router, switch, console or PC. It uses 24AWG stranded bare copper conductors in four twisted pairs with a PE divider and 50-micron gold-plated RJ45 contacts. The white jacket supports color-coded port labeling in home, office or gaming setups. It is tested to 550MHz and backward compatible with Cat5e.

Check port spacing and length

Verify that the 18in reach suits the distance between your two RJ45 ports without tension. Ensure both devices have standard 8P8C jacks and that the snagless boot can clear any adjacent connectors or cable-management clips. The cable is unshielded UTP, so avoid routing it parallel to power cords or fluorescent ballasts. Confirm your switch or router negotiates Gigabit speeds on the port you plan to use.

Low heat and silent operation

As a passive copper cable it draws no power and generates no measurable heat during normal Gigabit or short-run 10G traffic. There are no moving parts, so acoustic noise is zero. The PVC jacket and molded boot remain at ambient temperature even under continuous load. No active cooling or additional power budget is required for this link.