We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular RGB hub with ten 3-pin ports, sticky pad underneath, short cables attached

EN-Labs

EN-Labs 5VRGBHUB1X10H 5V AURA RGB Hub 10 Ports 1ft Cable

SKU CH-933G-VQ7HZ

A 5V AURA RGB hub expands one motherboard header to ten ports for synchronous fan and lighting control, includes a 1ft extension cable and Molex power lead, and mounts with an adhesive pad

  • Cable length1 ft (0.3 m)
  • Product typeRGB Hub
  • Overall length1 ft (0.3 m)
  • Key features5 V AURA RGB Lighting Hub Extend the rare RGB interface on y
  • Control 10 RGB devices from a single 5V motherboard header
  • Synchronous lighting across all connected fans and strips
  • Extra Molex 5V input prevents motherboard header overload
  • 1 ft extension cable plus 1 ft Molex power cable included
  • Adhesive backing secures the hub inside the case

5V AURA RGB Hub with Ten Ports

This hub expands a single 5V AURA header on the motherboard to ten ports, letting you drive up to 10 addressable RGB fans or strips in sync. It is built for builders who use 5V AURA-compatible boards from major vendors and need more headers than the board provides.

Passive operation with Molex power option

The hub itself draws no extra power beyond what the motherboard header supplies, typically 15 W at 5 V and 3 A. If connected devices dim, the included Molex cable can feed 5 V directly from the PSU to relieve the header.

Sticky-mount base and short cables included

A 3M adhesive pad on the underside secures the hub inside the case without screws. The package supplies a 1 ft female-to-female RGB extension cable and a 1 ft Molex power cable, so keep runs under 3.3 ft for best signal integrity. Not compatible with 12V RGB headers.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model name5VRGBHUB1 × 10H
Product typeRGB Hub
Size & build
Overall length1 ft (0.3 m)
Cable length1 ft (0.3 m)

Questions about this item

How do I install the EN-Labs 5V AURA RGB hub and what is the common mistake?

Connect the hub to the motherboard 5V 3-pin header matching the arrow mark to the 5V pin, attach the included Molex cable to the PSU for extra power, and use the sticky pad to mount it; the step often missed is aligning the arrow on every plug with the 5V marking on both motherboard and hub.

What maintenance or replacement will this hub need later?

No routine maintenance is required; if LED strips or fans become dim or flicker, check that total cable runs stay under 3.3 ft and that the Molex power connection remains secure, otherwise the hub itself has no user-serviceable parts.

What limit appears first when running all ten ports continuously?

The motherboard 5V header is typically rated for 15W (5V/3A); exceeding that causes dimming, so the included Molex power cable must be used to avoid the header overload limit.

More in Internal PSU & Riser Cables

Similar items