We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five silver aluminium cubes 14mm square with 3M 8810 tape

EN-Labs

EN-Labs Aluminium Heatsinks 14x14x6mm 5pcs 3M 8810 Tape diy cooling

SKU CH-WGHS-WKZ06

Five 14×14×6 mm aluminium heat sinks with 3M 8810 adhesive tape cool motherboard chipsets, A4988 drivers, Raspberry Pi and similar small components

  • Product colorSilver
  • Compatible withMotherboard Chipsets
  • Main materialAluminium
  • Key features5 pcs of 14 × 14 × 6 mm aluminum heat sinks with 3M 8810 Hea
  • Product dimensions14 mm × 14 mm × 6 mm
  • Efficient heat dissipation for 3D printer A4988 chipsets
  • Pre-applied 3M 8810 tape bonds with pressure only
  • 6 W/m-k thermal conductivity ensures reliable cooling
  • Aluminium construction fits Raspberry Pi and similar boards
  • Compact 14x14x6mm size suits tight component spaces

Compact aluminium heatsinks for chip-level cooling

This pack contains five 14x14x6mm aluminium heatsinks intended for motherboard chipsets, power ICs, LED drivers and single-board computers such as Raspberry Pi. They suit hobbyists and repair technicians who need passive cooling on small surface-mount components.

Pre-applied 3M 8810 tape removes the need

Each heatsink ships with a 3M 8810 thermally conductive pressure-sensitive tape rated at .6 W/m-k. The tape bonds on contact without a cure cycle, conforms to slightly uneven surfaces and provides electrical insulation alongside thermal transfer.

Five pieces cover multiple chips on a single board

The 14mm square footprint fits common stepper-driver chips such as the A4988 and similar-size voltage regulators. Builders needing larger radiators, taller fins or active airflow will find the thermal headroom limited to low-power devices.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 92% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorSilver
Size & build
Main materialAluminium
Product dimensions14 mm × 14 mm × 6 mm
Compatibility
Compatible withMotherboard Chipsets

Questions about this item

Will the 3M 8810 adhesive tape need replacing after extended use?

The 3M 8810 tape forms a permanent bond using only pressure; it does not require a heat cure cycle and is designed to remain in place without routine replacement.

What thermal limit does the 0.6 W/m-k conductivity of the 3M 8810 tape impose under continuous load?

The tape's 0.6 W/m-k conductivity governs the heat flow from the chip to the aluminium heatsink, so sustained loads that exceed this transfer rate will cause the component temperature to rise.

How hot do the 14x14x6mm aluminium heatsinks get when running all day on a Raspberry Pi?

The aluminium heatsinks passively dissipate heat from the chip; their temperature will stabilise based on the component's power draw and the 0.6 W/m-k tape's thermal resistance.

More in Heatsinks & Water Blocks

Similar items