We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ribbon cable with two PCIe 6-pin male connectors, 50 cm long

EN-Labs

EN-Labs PCIe 6-pin Male to Male Internal Power Cable 50 cm 18AWG

SKU CH-9NCR-XDRCV

A 50 cm PCIe 6-pin male-to-male cable with UL-listed 18AWG conductors for GPU mining power-supply breakout boards

  • Cable length1.64 ft (0.5m)
  • First connectorPCIe 6pin Male
  • Second connectorPCIe 6pin Male
  • Connector count2
  • Product typePCIe 6pin power cable for mining
  • Overall length50CM/1.64 ft
  • UL Listed 18AWG copper conductor ensures safe power delivery
  • 50 cm ribbon cable keeps GPU-to-board runs tidy
  • PCIe 6-pin male both ends connects mining breakout boards directly
  • Compatible with DPS-1200, DPS-800GB, PS-2751-5Q and similar units
  • New condition guarantees factory-fresh reliability for continuous mining loads

PCIe 6-pin male-to-male cable for mining breakout

This EN-Labs cable carries 12 V power between a mining breakout board and a graphics card. Both ends terminate in standard PCIe 6-pin male connectors. The 50 cm length suits compact GPU spacing inside mining frames. UL-listed 18 AWG copper conductors handle the current required by supported server power supplies.

Builders wiring DPS-800GB, DPS-1200.

The pinout matches the listed server PSUs and HSTSN-PL12 breakout boards. Installers using consumer ATX power supplies or 8-pin PCIe ports will need a different cable. The fixed 50 cm reach also rules out builds where cards sit farther from the breakout board.

UL-listed 18 AWG copper conductor rating

This wire gauge sets the safe continuous current for each 6-pin connection. Verify that the GPU power draw stays within the 18 AWG limit before deploying multiple cards on a single rail.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Product typePCIe 6pin power cable for mining
Ports & slots
First connectorPCIe 6pin Male
Second connectorPCIe 6pin Male
Connector count2
Size & build
Overall length50CM/1.64 ft
Cable length1.64 ft (0.5m)

Questions about this item

What gauge conductor limits current under sustained mining load?

The cable uses UL-listed 18AWG copper conductors, which set the safe continuous current capacity for the 6-pin PCIe connectors.

How much heat does the 50 cm ribbon cable produce when running all day?

The 18AWG copper ribbon generates minimal heat at rated load; its short 50 cm length keeps resistance low during continuous operation.

Which breakout board or PSU must I already own for the male-to-male plugs to work?

You need a mining breakout board or server PSU such as DPS-800GB, DPS-1200, PS-2751-5Q, HSTSN-PL12, DPS-700LB, PS-2112-5L, DPS-750RB or DL580 that provides a female PCIe 6-pin output.

More in Internal PSU & Riser Cables

Similar items