We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black ribbon cable with two PCIe 6-pin male connectors, 30 cm long

EN-Labs

EN-Labs PCIE6PMM30CM PCIe 6-pin Male to Male internal power cable 30 cm 18 AWG

SKU CH-ZZFX-0W8VH

Connects GPU mining breakout boards with a 30 cm, 18 AWG PCIe 6-pin male-to-male cable

  • Cable length1 ft (0.3 m)
  • First connectorPCIe 6pin Male
  • Second connectorPCIe 6pin Male
  • Connector count2
  • Product typeGPU power cable for mining
  • Overall length1 ft / 30CM
  • PCIe 6-pin male-to-male link connects GPU to breakout board
  • UL-listed 18 AWG copper conductor handles high mining current
  • 30 cm ribbon cable keeps internal routing tidy
  • Works with DPS-800GB, DPS-1200, PS-2751-5Q server supplies
  • Compatible with PS-2112-5L, DPS-750RB, DL580 power units

30 cm PCIe 6-pin power cable

This internal cable carries auxiliary power between a mining breakout board and a graphics card. It is built for GPU mining rigs that use server-style power supplies such as the DPS-1200 or PS-2751 series. The 30 cm length keeps routing tidy inside a dense chassis.

UL-listed 18 AWG copper conductor

The cable uses 18 AWG copper wire that is UL listed for current-carrying capacity. Both ends terminate in PCIe 6-pin male connectors, so the link is a direct male-to-male run without adapters. This gauge and certification are the key specification for safe power delivery.

Fits DPS and PS-series mining supplies

Connect the cable from a compatible breakout board on supplies like the DPS-800GB, DPS-1200, PS-2751-5Q or HSTSN-PL12 to the graphics card. It frees the builder from sourcing custom pin-outs and eliminates the need for Molex-to-PCIe adapters. Not suited for builds that require 8-pin or 12-pin GPU connectors.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Product typeGPU power cable for mining
Ports & slots
First connectorPCIe 6pin Male
Second connectorPCIe 6pin Male
Connector count2
Size & build
Overall length1 ft / 30CM
Cable length1 ft (0.3 m)

Questions about this item

How much current can the 18 AWG conductors carry in a mining rig?

The 18 AWG copper conductors are UL Listed and rated for typical GPU auxiliary power loads up to the connector limit.

What does the PCIe 6-pin male-to-male interface limit in practice?

Each connector delivers up to 75 W, so the cable caps total throughput at that level per end.

Will the 30 cm ribbon cable reach between a DPS-1200 breakout board and a graphics card in a standard case?

At 30 cm the flat ribbon is designed for tight breakout-board-to-GPU runs inside mining frames or compact chassis.

More in Internal PSU & Riser Cables

Similar items