We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular hub with five 4-pin fan headers and a short 1.3 ft cable attached

EN-Labs

EN-Labs PRPWMHUB5 5-Port PWM Fan Hub 1.3 ft

SKU CH-KVFC-60ZPK

Expands one motherboard 4-pin fan header into five 4-pin ports with five solid capacitors and includes a 1.3 ft extension cable

  • Cable length1.3 ft (0.4 m)
  • First connectorPWM TX4 4pin female
  • Second connector5 x PWM TX4 4pin male
  • Connector count6
  • Product typePWM 4pin fan hub splitter
  • Overall length1.3 ft (0.4 m)
  • Expands a single 4-pin header into five PWM fan ports
  • Five onboard solid capacitors reduce load on the motherboard
  • PWM fans run synchronised from one motherboard controller
  • 3-pin fans operate at full speed when connected
  • Includes a 1.3 ft PWM extension cable with latch locking

Product identity

The EN-Labs PRPWMHUB5 is a 5-port PWM fan hub that expands a single motherboard 4-pin header into five 4-pin connectors. It includes a 1.3 ft PWM extension cable and five solid capacitors to stabilise power drawn from the CPU_FAN or SYS_FAN header. The hub is designed for builders who want to run multiple 12 V fans from one PWM source.

Setup check

Verify that your motherboard has a spare 4-pin PWM header rated to supply the combined current of all attached fans. The red connector is intended for the CPU fan signal; 3-pin and 2-pin fans will run at full speed because they cannot accept PWM control. The 3M double-sided tape on the back requires a clean, flat surface for secure mounting inside the case.

Thermals noise power

The hub itself adds no active cooling and draws negligible power beyond the fans connected to it. Fan speed and noise are governed entirely by the motherboard PWM curve applied to the CPU_FAN or SYS_FAN header. The onboard capacitors help smooth voltage delivery, reducing electrical noise on the header without affecting thermal performance.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model namePRPWMHUB5
Product typePWM 4pin fan hub splitter
Ports & slots
First connectorPWM TX4 4pin female
Second connector5 x PWM TX4 4pin male
Connector count6
Size & build
Overall length1.3 ft (0.4 m)
Cable length1.3 ft (0.4 m)

Questions about this item

What cables and connectors come with the EN-Labs PRPWMHUB5 hub?

The package includes the 5-port PWM hub board with one 4-pin female input and five 4-pin male outputs, plus a separate 1.3 ft 4-pin PWM extension cable with a latch-locking connector. The hub’s back has 3M double-sided tape for mounting.

Should I choose this 5-port hub or look for a different capacity?

This model provides exactly five 4-pin fan headers from a single motherboard 4-pin header. If you need to run more than five fans from one header you would need a hub with additional ports; if you need fewer ports a smaller splitter would suffice.

What does the 12 V rating mean when the hub is installed in my PC?

The hub draws 12 V power from the motherboard’s CPU_Fan or SYS_Fan header and distributes it to all connected fans. Four-pin PWM fans receive speed control; 2-pin or 3-pin fans run at full speed because they lack the PWM signal wire.

More in Internal PSU & Riser Cables

Similar items