We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Y-cable with SATA 15-pin male to LP4 and SP4 female connectors

EN-Labs

EN-Labs SATA to LP4 & SP4 Splitter Cable 8 Inches

SKU CH-M4Z0-1YD0C

A splitter cable delivering SATA power to both a Molex LP4 and SP4 connector for legacy drives

  • Connector count3
  • Connector genderMale to Female
  • Product typeCable Splitters
  • Product colorMulti-Color
  • Overall length6 in - 10 in
  • Key featuresProvide power to your Molex 4pin IDE drive and SP4 Floppy Dr
  • Powers IDE Molex LP4 and SP4 drives from a SATA 15-pin connector
  • 20AWG copper conductor with UL Listed rating
  • 8-inch length fits tight desktop or server builds
  • Y-splitter design feeds two legacy devices from one SATA 15-pin port
  • Male-to-female terminals ensure secure internal power connections

SATA to LP4 and SP4 Splitter

This cable adapts a single SATA 15-pin power connector into both a Molex LP4 and an SP4 floppy drive connector. It suits builders adding legacy IDE optical drives, hard drives, or floppy drives to a modern power supply that only offers SATA power outputs. The Y-splitter design powers two different legacy devices from one port.

Desktop and server upgrades with legacy drives

The splitter serves systems that still run IDE Molex LP4 hard drives or SP4 floppy drives but lack native connectors on the PSU. It is not for installations that require a straight-through cable without a split, builds needing more than one LP4 or SP4 connector per SATA port, or users who need longer reach than the fixed short length allows.

20AWG copper conductors with UL listing

The cable uses 20AWG copper wire rated for 12V and 5V delivery to IDE devices. UL listing confirms the materials meet recognised safety standards for internal power wiring. This specification determines whether the splitter can reliably supply the current your legacy drives demand.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model nameSATA2LP4SP412
Product typeCable Splitters
Product colorMulti-Color
Ports & slots
Connector count3
Connector genderMale to Female
Size & build
Overall length6 in - 10 in

Questions about this item

What type of power connector must my PSU have free to use this splitter?

Your power supply needs an available SATA 15pin power connector to plug the male end of this cable into.

Can I run a legacy IDE hard drive and a floppy drive simultaneously from one SATA port?

Yes, the Y-splitter provides both an LP4 connector for an IDE drive and an SP4 connector for a floppy drive from the single SATA source.

How do I confirm the cable is delivering power correctly after installation?

Both connected drives should spin up and be detected by the BIOS when the system is powered on.

More in Internal PSU & Riser Cables

Similar items