We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 10 inch SATA to four TX4 fan splitter cable

EN-Labs

EN-Labs SATATX4-1X110IN SATA to 4x TX4 fan power splitter cable 10 inch black

SKU CH-7JCW-6JH23

Converts a 12V SATA power connector into four TX4 fan headers with a 10-inch black sleeved cable

  • Cable length10 in (25.4 cm)
  • First connectorSATA
  • Second connectorTX4
  • Connector count2
  • Product typeCable Splitters
  • Product colorBlack

Style Fan Adapter

Cable Length 10 in.

  • Powers four fans from one SATA connector
  • 10-inch sleeved cable keeps routing tidy
  • 22 AWG copper core delivers reliable 12 V supply
  • Two energised pins per header run fans at full speed
  • 15-pin SATA plug draws power directly from the PSU

One-to-four fan power adapter

This cable splits a single SATA power connector into four TX4 fan headers. It lets a power supply drive multiple case fans without using motherboard fan headers. The 10-inch length keeps routing tidy inside compact chassis. Builders who need more fan connections than the board provides will find it useful.

Replaces motherboard fan headers

When a motherboard lacks enough 3-pin or 4-pin headers this adapter moves fan power to the PSU. The jump is worth it if you are adding extra intake or exhaust fans and have spare SATA plugs. Note that only two pins per connector are energised so PWM speed control is not possible. Fans will run at full 12V speed continuously.

Fits standard ATX builds

The cable uses UL 1007 22AWG copper conductors and a black sleeved jacket for durability. It connects directly to any 15-pin SATA power plug from the PSU. No additional adapters or motherboard configuration are required. The 10-inch reach suits most mid-tower layouts while leaving enough slack for cable management.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $3.99
Cheaper than about 96% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model nameSATATX4-1 × 110IN
Product typeCable Splitters
Product colorBlack
Ports & slots
First connectorSATA
Second connectorTX4
Connector count2
Size & build
Overall length6 in - 10 in
Cable length10 in (25.4 cm)

Other versions of this model

5 more in the same range

Questions about this item

What connector does the SATA end use to draw power from the PSU?

The cable draws 12 V power through a 15-pin SATA male connector that plugs directly into a PSU SATA power lead.

How do you connect the four fan headers, and what is the common mistake?

Plug each 3-pin or 4-pin fan into the four female TX4 headers; the mistake is expecting PWM control — only two pins carry power, so fans run at full speed.

When should the 22 AWG copper cable be inspected or replaced?

Check the sleeved 10-inch cable whenever you rebuild or if insulation shows wear; replace it if conductors are exposed or connectors become loose.

More in Internal PSU & Riser Cables

Similar items