STARTECH HDMI-SPLITTER-4K60UP 2-Port 4K 60Hz Video Splitter
- HDMI Splitters
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Extracts audio from a 4K 60 Hz HDMI source to optical SPDIF and 3.5 mm analogue outputs while passing video through unchanged
The ESTONE OZV8 splits one HDMI input into a mirrored HDMI output plus separate optical SPDIF and 3.5 mm analogue audio. It handles video up to 4K at 60 Hz with 18 Gbps bandwidth and deep colour up to 36 bit. A three-position EDID switch selects pass-through, stereo or 5.1-channel audio modes. The unit ships with a 5 V power adapter and a short HDMI cable.
The aluminium enclosure dissipates heat without a fan, so operation is completely silent. Maximum working current is 350 mA from the included 5 V supply, keeping energy use minimal. No driver installation is required, and the extractor adds no measurable latency to the video path. The compact 5.59 by 3.15 by 1.26 inch form factor fits behind most displays or AV racks.
The 340 MHz pixel clock and 18 Gbps throughput are maintained during extended playback sessions without signal drop-out or HDCP handshake loss. Both SPDIF and 3.5 mm outputs remain active simultaneously, allowing a soundbar and headphones to run in parallel. The device does not support Bluetooth headsets and cannot accept an AV receiver as the HDMI source.
Measured against everything we stock in HDMI & Video Splitters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Product line | OZV8 |
| Model name | OZV8 |
| Part number | OZV8 |
| Product type | HDMI Splitters |
| Product color | Black |
| Performance | |
| Bandwidth rating | 18 Gbit/s |
| Display | |
| Maximum supported resolutions | 3840 × 2160 |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| Port count | 3 |
| Input ports | 1 HDMI input |
| Output ports | One HDMI + Audio (SPDIF+3.5 mm) Output |
| Size & build | |
| Product dimensions | 5.59 × 3.15 × 1.26 in |
| Product weight | 3.2 oz |
| In the box | |
| Units per package | 1 |
| In the box | 1 X HDMI Audio Extractor 1 x HDMI cable 1 × 5 V/1A Power Adapter 1 X User Manual |
Connect the source to the HDMI IN port, the display to the HDMI OUT port, and attach the supplied 5 V/1 A power adapter; then set the 3‑position EDID switch to Pass, 2CH or 5.1CH to match your audio system.
No routine maintenance is needed; keep the unit ventilated, check that the power adapter and cables remain firmly seated, and replace the 5 V/1 A supply only if it fails.
The 18 Gbps bandwidth ceiling and 350 mA current draw are the primary limits; ensure both source and display support 4K@60 Hz simultaneously to avoid signal dropouts.
More in HDMI & Video Splitters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?